Abstract:Abstract Aerostatic bearing is an ultra-precision component that uses a spindle surrounded by a thin film of air. Due to the high accuracy of aerostatic bearing, the demand for these components is very high in electronic, instrumentation, healthcare, and other manufacturing or processing industries. In the present work, the main focused area is on the experimental determination of the effect of roughness parameter on the performance of the aerostatic journal and thrust bearings. To achieve the aim, the aerostatic bearing is designed based on theoretical analysis. The present design is numerically investigated by simulation of airflow in ANSYS Fluent with computational fluid dynamics module. The results from the simulation are validated by the results generated for pressure distribution in previous researches. After performing the finishing on the bearing and spindle surface, the manufactured components are assembled for analysing the variation in radial and axial loads acting on the spindle with the spindle displacement (1-5 μm) in the direction of the load at supply pressures (3-6 bar) in the clearance of 30 μm. For surface improvement of the air bearing, three different techniques are used namely machining, grinding, and magnetorheological finishing. For each roughness reduction technique, the variation in axial and radial loads acting on the spindle is determined with variation in spindle displacement. The experimental results showed the increase in load capacity due to improvement in the surface finish for journal bearing and thrust bearing at 5 μm displacement in the spindle is found to be 0.68 N for machining to grinding and 2.0 N from grinding to magnetorheological finishing respectively. The results determined for the surface finish parameter reveals the effect of surface roughness on the load-carrying capacity of the aerostatic journal and thrust bearing. The current study on the surface finishing of aerostatic bearing is found effective for the applications such as drives in production machines where good grade of surface finish are the major parameters for improving the overall functional efficiency.

Vibratory finishing for the cavity of aero-engine integral casting casing: mechanism analysis and performance evaluation

Vibration suppression of aeroengine casing during milling

Vibration Control of Weakly Rigid Casing Based on Gasbag-rubber Damping Flexible Fixture

The Engine Casing Machining Holes Repairing Based on Vibration Wire Feeding

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

Novel Bidirectional Volume Alternating Cavitation Technique for the Inner Surface Finishing of Small Holes

A novel rotary barrel finishing approach for high-performance bearing ring surfaces finishing simultaneously via floating clamp

Optimization of vacuum counter-pressure casting process for an aluminum alloy casing using numerical simulation and defect recognition techniques

The Effect Of Process Parameters On Surface Roughness In Abrasive Jet Finishing With Grinding Wheel As Restraint

Enhanced machinability of aluminium-based silicon carbide by non-resonant vibration-assisted magnetorheological finishing

Study on Blade Vibration Alleviation in a Nozzleless Radial Turbine via Casing Treatment

Effect of centrifugal casting process on mold filling and grain structure of K418B turbine guide

Improving finishing uniformity using fluid field vibration in abrasive water flow polishing of inclined hole

Tolerance Design of Multistage Aero-Engine Casing Assembly by Vibration Characteristic Evaluation

Investigation of the Vibration Transmission Characteristics of the Aero-Engine Casing System by Rotating Force Exciter

Surface Quality Improvement of Castings by Expendable Pattern Shell Casting with Vacuum and Low Pressure

Study on Rapid Casting for Complex Parts

Investigating The Effect of Surface Finishing On Performance of Designed Aerostatic Bearing For Its Improved Precision Applications

Elimination of cracks in stainless steel casings via 3D printed sand molds with an internal topology structure

Machining fixture and deformation control of aero-engine thin-walled casing

Study on Rubbing-Induced Vibration Characteristics Considering the Flexibility of Coated Casings and Blades