Abstract:PMMA and Poly carbonate (PC) are wonderful low cost materials which can be easily tailored and shaped. However they have poor mechanical, thermal and electrical properties which are required to be enhanced in several applications where along with high strength, a quick heat transfer becomes a necessity. Carbon nanotubes (CNT) are excellent new materials having extraordinary mechanical and transport properties. In this paper we report results of fabricating composites of varying concentrations of CNTs with PMMA and PC and measurements of thermal conductivity data by a simple transient heat flow. The samples in disk shapes of around 2 cm diameters and 0.2 cm thickness with CNT concentrations varying up to 10 wt percent were fabricated. By keeping one end of the discs at steam temperature, the temperature of the other end was noted for each sample after 10 s. The rise in temperature was correlated with thermal conductivity which was appropriately calibrated. We found that both PMMA and PC measured high thermal conductivity with increase in the concentration of CNTs. The thermal conductivity of PMMA rose from about 0.2 W/mK to 0.4 W/mK at 10 wtpercent of CNT whereas for PC, it rose from about 0.2 W/mK to 0.9 W/mK at 10 wt percent of CNT. It is thus observed that modification in thermal properties is easily achieved by making CNT based composites using only up to 10 wt percent of CNTs in PMMA and PC and enabling quicker heat dissipation in these materials.

Comparison between CNT Thermal Interface Materials with Graphene Thermal Interface Material in Term of Thermal Conductivity

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Thermal Properties of the Graphene Composites: Application of Thermal Interface Materials

Indium Assisted Multiwalled Carbon Nanotube Array Thermal Interface Materials

Metal-Level Thermally Conductive yet Soft Graphene Thermal Interface Materials

Aluminum/Graphene Thermal Interface Materials with Positive Temperature Dependence

Dense Vertically Aligned Multiwalled Carbon Nanotube Arrays As Thermal Interface Materials

The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Preparation and Thermal Properties of the Graphene-Polyolefin Adhesive Composites: Application in Thermal Interface Materials

Reducing thermal contact resistance using a bilayer aligned CNT thermal interface material

Vertically Aligned Graphene for Thermal Interface Materials

Thermal boundary resistances of carbon nanotubes in contact with metals and polymers.

Enhancement of Interfacial Thermal Transport by Carbon Nanotube-Graphene Junction

Synergistic effect of carbon fiber and graphite on reducing thermal resistance of thermal interface materials

Novel Three-Dimensional Carbon Nanotube Networks As High Performance Thermal Interface Materials

Graphene-Assisted Thermal Interface Materials with a Satisfied Interface Contact Level Between the Matrix and Fillers

Application of graphene as filler to improve thermal transport property of epoxy resin for thermal interface materials

Highly Deformable Thermal Interface Materials Enabled by Covalently-Bonded Carbon Nanotubes

A Novel Thermal Interface Material Composed of Vertically Aligned Boron Nitride and Graphite Films for Ultrahigh Through-Plane Thermal Conductivity

Modification of Thermal Conductivity of PMMA and PC by making their Nanocomposites with Carbon Nanotubes

Thermal Contact Resistance of Epoxy Composites Incorporated with Nano-Copper Particles and the Multi-Walled Carbon Nanotubes