Abstract:Advances in pore-scale imaging (e.g., μ-CT scanning), increasing availability of computational resources, and recent developments in numerical algorithms have started rendering direct pore-scale numerical simulations of multi-phase flow on pore structures feasible. Quasi-static methods, where the viscous and the capillary limit are iterated sequentially, fall short in rigorously capturing crucial flow phenomena at the pore scale. Direct simulation techniques are needed that account for the full coupling between capillary and viscous flow phenomena. Consequently, there is a strong demand for robust and effective numerical methods that can deliver high-accuracy, high-resolution solutions of pore-scale flow in a computationally efficient manner. Direct simulations of pore-scale flow on imaged volumes can yield important insights about physical phenomena taking place during multi-phase, multi-component displacements. Such simulations can be utilized for optimizing various enhanced oil recovery (EOR) schemes and permit the computation of effective properties for Darcy-scale multi-phase flows.We implement a phase-field model for the direct pore-scale simulation of incompressible flow of two immiscible fluids. The model naturally lends itself to the transport of fluids with large density and viscosity ratios. In the phase-field approach, the fluid-phase interfaces are expressed in terms of thin transition regions, the so-called diffuse interfaces, for increased computational efficiency. The conservation law of mass for binary mixtures leads to the advective Cahn–Hilliard equation and the condition that the velocity field is divergence free. Momentum balance, on the other hand, leads to the Navier–Stokes equations for Newtonian fluids modified for two-phase flow and coupled to the advective Cahn–Hilliard equation. Unlike the volume of fluid (VoF) and level-set methods, which rely on regularization techniques to describe the phase interfaces, the phase-field method facilitates a thermodynamic treatment of the phase interfaces, rendering it more physically consistent for the direct simulations of two-phase pore-scale flow. A novel geometric wetting (wall) boundary condition is implemented as part of the phase-field method for the simulation of two-fluid flows with moving contact lines. The geometric boundary condition accurately replicates the prescribed equilibrium contact angle and is extended to account for dynamic (non-equilibrium) effects. The coupled advective Cahn–Hilliard and modified Navier–Stokes (phase-field) system is solved by using a robust and accurate semi-implicit finite volume method. An extension of the momentum balance equations is also implemented for Herschel–Bulkley (non-Newtonian) fluids. Non-equilibrium-induced two-phase flow problems and dynamic two-phase flows in simple two-dimensional (2-D) and three-dimensional (3-D) geometries are investigated to validate the model and its numerical implementation. Quantitative comparisons are made for cases with analytical solutions. Two-phase flow in an idealized 2-D pore-scale conduit is simulated to demonstrate the viability of the proposed direct numerical simulation approach.

Multiscale multiphase flow simulations using interface capturing and Lagrangian particle tracking

A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

An Improved Multi-Scale Two Phase Method for Bubbly Flows

Implementation and Validation of a Volume-of-fluid and Discrete-Element-method Combined Solver in OpenFOAM

Development of a Finite Element/discontinuous Galerkin/level Set Approach for the Simulation of Incompressible Two Phase Flow.

Numerical simulation of gas-liquid two-phase flow impacting fixed structure by CLSVOF/IB method based on OpenFOAM

Simulation of Slag Droplet Entrainment by Volume of Fluid and Lagrangian Particle Tracking Coupled Modeling.

An interface capturing method for liquid-gas flows at low-Mach number

A Discontinuous Galerkin Finite Element Framework for the Direct Numerical Simulation of Flow on High-Resolution Pore-Scale Images

A Hybrid Scheme of Level Set and Diffuse Interface Methods for Simulating Multi-Phase Compressible Flows

A consistent mass-momentum advection method for the simulation of large-density-ratio two-phase flows

A phase-field method for the direct simulation of two-phase flows in pore-scale media using a non-equilibrium wetting boundary condition

A Volume of Fluid Method for Three Dimensional Direct Numerical Simulations of Immiscible Droplet Collisions

A Hybrid Volume-of-Fluid/Euler–Lagrange Method for Vertical Plunging Jet Flows

An optimized Eulerian–Lagrangian method for two-phase flow with coarse particles: Implementation in open-source field operation and manipulation, verification, and validation

Smoothed-Interface SPH Model for Multiphase Fluid-Structure Interaction

A Non-staggered Projection Algorithm for Two-Phase Fluid-Structure Interaction Simulation Using the Phase-Field/Immersed-Boundary Method

Multi-phase Fluid Simulation Based on Narrow-Band FLIP Method