Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

A Hybrid Volume-of-Fluid/Euler–Lagrange Method for Vertical Plunging Jet Flows

Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

Numerical Investigation of Multi Rising Bubbles Using a Coupled Level Set and Volume of Fluid (CLSVOF) Method

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Numerical Simulation of Dam-Break Flow Impacting a Stationary Obstacle by a CLSVOF/IB Method.

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

Numerical Simulation of Incompressible Interfacial Flows by a Level Set Re-Distancing Method with Improved Mass Conservation

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Spray Trajectory and 3D Droplets Distribution of Liquid Jet in Crossflow with Digital Inline Holography

A Conservative Finite Volume-Particle Hybrid Method for Simulation of Incompressible Interfacial Flow

Numerical simulation of gas-liquid two-phase flow impacting fixed structure by CLSVOF/IB method based on OpenFOAM

Multi-Scale methodology of breakup and atomization for liquid jets in crossflow

Hybrid Eulerian-Lagrangian simulations of liquid jet atomization in swirling cross flow

A hybrid Eulerian-Lagrangian flow solver

Boiling and evaporation model for liquid-gas flows: A sharp and conservative method based on the geometrical VOF approach

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Detailed Numerical Simulation of Multi-scale Interface-Vortex Interactions of Liquid Jet Atomization in Crossflow