Abstract:To bring the potential power of the capacitively coupled contactless conductivity detection ((CD)-D-4) technique to full play and extend the application fields of (CD)-D-4, our previous work has developed a (CD)-D-4 sensor which is suitable for conductivity detection of electrolyte solution in industrial fields (Sensors and Actuators A 213 (2014) 1-8). With the introduction of series resonance principle, the (CD)-D-4 sensor can overcome the influence of coupling capacitances on conductivity measurement. By a specific design of shield configuration, the (CD)-D-4 sensor can overcome the influence of stray capacitances and the environment interference in industrial fields. Although the measurement performance of the (CD)-D-4 sensor is satisfactory and it is suitable for the conductivity detection in industrial fields, the input-output characteristic of the (CD)-D-4 sensor is non-monotonic, which may limit the practical applications of the (CD)-D-4 sensor. To overcome this drawback, an improved (CD)-D-4 sensor for conductivity detection in industrial fields has been developed. The basic conductivity measurement method (the series resonance principle) and the shield configuration of the improved (CD)-D-4 sensor are the same as those of the (CD)-D-4 sensor in our previous work. However, the measurement circuit of the detection path of the improved (CD)-D-4 sensor has been optimized. The one-inductor design has been replaced by a two-inductor design. With this optimization, the input-output characteristic of the improved (CD)-D-4 sensor is theoretically monotonic. Conductivity measurement experiments were carried out on four pipes with inner diameters of 1.8 mm, 3.3 mm, 5.0 mm and 7.6 mm, respectively. The experimental results indicate that the development of the improved (CD)-D-4 sensor is successful. In comparison with the previous (CD)-D-4 sensor, the measurement accuracy of the improved (CD)-D-4 sensor is comparable. But, the improved (CD)-D-4 sensor has the advantages of the monotonic input-output characteristic and the convenience for practical conductivity detection in industrial fields. Meanwhile, it is found that the input-output characteristic of the improved (CD)-D-4 sensor is nonlinear and the sensitivity of the improved (CD)-D-4 sensor decreases with the increase of conductivity. (C) 2015 Elsevier B.V. All rights reserved.

Integrated interdigital electrode and thermal resistance micro-sensors for electric vehicle battery coolant conductivity high-precision measurement

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

An Improved Capacitively Coupled Contactless Conductivity Detection Sensor for Industrial Applications

Online Measurement of Conductivity/permittivity of Fluid by a New Contactless Impedance Sensor.

A Novel Electrical Resistance Tomography System Based on ${\rm{c}}^{4}{\rm D}$ Technique

Design and Implementation of an Industrial C4D Sensor for Conductivity Detection

Design of Capacitively Coupled Contactless Conductivity Detection Sensor

Design and Batch Preparation of a High-Performance Temperature Sensor for New Energy Vehicles Using Platinum Film

A Direct-Reading MEMS Conductivity Sensor with a Parallel-Symmetric Four-Electrode Configuration

An Integrated Miniature Conductivity And Temperature Sensor Chip With Open-Cell Annular Electrode

Non-contact detection of single-cell lead-acid battery electrodes’ defects through conductivity reconstruction by magnetic induction tomography

Non-Damaged Lithium-Ion Batteries Integrated Functional Electrode for Operando Temperature Sensing

Contactless Sensor for Real-Time Monitoring of Lithium Battery External Short Circuit Based on Magnetoelectric Elastomer Composites

Real-time Mechanical and Thermal Monitoring of Lithium Batteries with PVDF-TrFE Thin Films Integrated Within the Battery

An Eddy Current Testing Method for Thickness and Conductivity Measurement of Non-Magnetic Material

Local Cell Temperature Monitoring for Aluminum Shell Lithium-Ion Battery Based on Electrical Resistance Tomography

Implantable Flexible Temperature Sensor for In-Operando Sensing of Lithium-ion Batteries

Flexible, Multifunctional Micro-Sensor Applied to Internal Measurement and Diagnosis of Vanadium Flow Battery

Implanted Potential Sensing Separator Enables Smart Battery Internal State Monitor and Safety Alert

A Micromachined Device Using Transient Hot-Wire Method For High Accuracy Thermal Conductivity Measurement Of Semi-Rigid Materials

Contactless Magnetoelectric Sensor Based on PVDF-TrFE and Metglass Laminates for Lithium-Ion Battery Current and Vibration Monitoring