Abstract:This paper presents the implementation and verification of a dual-probe measurement system with a novel method and easily integrated chromatic confocal probes, for synchronous evaluation of not only the inner and outer cylindricity but also the thickness distribution of a ring-type cylinder. A pair of measuring probes mounted on a four-axis scanning stage, which is composed of XYZ-slides and a spindle, is utilized to target the two sides of the ring-type cylinder. In the developed system, to reduce the influence of the positioning errors and tilt misalignments of the confocal probes and the cylinder, alignment methods are developed. The outputs of the measuring probes are employed to accurately evaluate the geometric errors of the ring-type cylinder through performing spiral scanning while separating the Z-slide and spindle motion errors of the scanning stage based on a reversal error separation method. To verify the performance of the proposed system and method, the geometric errors of a thin-walled cylinder which has a nominal outer diameter of 50 mm, an inner diameter of 40 mm, and a length of 100 mm are evaluated in experiments. The experimental results are further compared with those by a coordinate measuring machine (CMM), and the high correspondence of the comparison results well confirm the feasibility of the implemented measurement system. Finally, measurement uncertainty analysis is conducted to demonstrate the reliability of the proposed method for the evaluation of the geometric errors of ring-type cylinders. The measurement accuracy is comparable to that of a CMM.

The online detection system of concentric ring size based on machine vision

Automated Vision Inspection System for the Size Measurement of Workpieces

Non-Contact Vision Inspection System Of Geometric Dimension Based On Labview And Imaq Vision

A high-resolution detecting system based on machine vision for defects on large aperture and super-smooth surface

The on- line bearing inspection system based on machine vision

Research on Online Measurement Method for Small Workpiece Circular Holes Based on Machine Vision

Detection Of Small Surface Defects Using Dct Based Enhancement Approach In Machine Vision Systems - Art. No. 60400h

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Annular Region Statistical Feature-based Recognition of Bearing Rings under Non-exact Positioning

Detection of surface defects and dimensions of graphite seal ring based on machine vision

Ccd Industrial Online Measurement Of Circular Shape

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Machine vision based roundness and cylindricity detection of bearing rollers

Optimization Scheme of Measuring Accuracy of Bearing Seat Size Based on Machine Vision

Research on bearing surface defect detection system based on machine vision

Study and Application of Automatic Count System Based on Computer Vision Detect Technology

Measurement System of Gear Parameters Based on Machine Vision

High precision size measurement system of industrial profiles section

Automatic System to Measure Mechanical Parts Based on Edge Detection

Study of real-time parameter measurement of ring rolling pieces based on machine vision

An Automatic Visual Inspection System for Cone Surface Defects.