Stress Sensitivity of Fractured and Vuggy Carbonate: an X‐ray Computed Tomography Analysis

Yongfei Yang,Liu Tao,Haiyuan Yang,Stefan Iglauer,Xin Wang,Roohollah Askari,Jun Yao,Kai Zhang,Lei Zhang,Hai Sun

DOI: https://doi.org/10.1029/2019JB018759

2020-02-28

Abstract:Fractures, vugs and pores constitute the main pore space in carbonate reservoirs. The associated pore structure ‐ which is of key importance in terms of hydrocarbon production and fluid flow ‐ varies with effective stress. However, there is a serious lack of data with regards to how precisely the pore morphology changes as a function of effective stress; we thus carried out in‐situ loading‐unloading experiments (up to 20 MPa effective stress) where two carbonate samples (fractured and vuggy) were examined with X‐ray computed tomography at high resolution in 3D. The results showed that after loading porosity decreased exponentially, followed by an increase during unloading where it did not recover to its initial value. This was mainly because of the stress effect on large pore space (i.e. fractures and vugs). For fractured carbonate, the unrecovered porosity can be linked to similar reduction of the surface area and the average aperture of the fracture. Clearly, the changes in pore morphology were more significant in the fractured carbonate (including extension, connection and disconnection of fractures) during both loading and unloading, while the vuggy carbonate experienced irreversible structural damage. The vuggy carbonate has bigger porosity variation than fractured carbonate to the mechanical loading‐unloading cycle. This work thus demonstrates how carbonate pore morphology changes with depth (higher effective stresses are encountered deeper in the reservoir) or during production (with hydrocarbon depletion the effective stress increases).

geochemistry & geophysics

What problem does this paper attempt to address?

This paper attempts to solve the problem of pore - structure sensitivity in carbonate rock reservoirs under the change of effective stress. Specifically, the research aims to analyze the pore - structure changes in carbonate rock samples during the loading and unloading processes through X - ray Computed Tomography (X - CT) technology, so as to evaluate their responses to effective stress.

### Main problems:
1. **Changes in pore structure**: The research focuses on the changes of major pore spaces such as fractures, caves and pores in carbonate rocks under different effective stresses.
2. **Irrecoverable porosity changes**: Explore the reasons for the decrease in porosity during the loading process and the inability to fully recover the porosity during the unloading process, especially the influence of large pore spaces (such as fractures and caves).
3. **Differences in different types of carbonate rocks**: Compare the pore - structure changes in fractured and cave - type carbonate rocks during the loading - unloading cycle to determine which type of rock is more sensitive to effective stress.

### Research methods:
- **Sample selection**: Two typical carbonate rock samples with fracture and cave characteristics were selected respectively.
- **Experimental design**: Use X - CT technology to perform high - resolution 3D scans on samples and conduct loading and unloading experiments under different effective stresses (up to 20 MPa at most).
- **Data analysis**: Calculate parameters such as porosity, volume fraction, surface area and average pore diameter through image processing and segmentation to quantify the changes in pore structure.

### Key findings:
1. **Porosity change trend**: During the loading process, the porosity decreases exponentially; during the unloading process, the porosity increases but cannot return to the initial value.
2. **Influence of large pore spaces**: Large pore spaces (such as fractures and caves) are the main reasons for the irrecoverable porosity.
3. **Sensitivity of different types of carbonate rocks**: The porosity change of cave - type carbonate rocks is greater than that of fractured - type ones, and has experienced irreversible structural damage.

### Practical applications:
These results are helpful for understanding the pore - structure changes in carbonate rock reservoirs at different depths or during the production process (as the fluid pressure decreases and the effective stress increases), and provide a theoretical basis for increasing oil and gas production. Especially for high - pressure carbonate rock reservoirs, timely water injection and reservoir reconstruction methods (such as fracturing and acidizing) can effectively improve the flow performance of oil and gas.

Through this research, the author hopes to provide scientific basis and technical support for the effective development of carbonate rock reservoirs.