Abstract:This study addresses the demand for efficient and compact heat exchange solutions in industrial applications. Unlike previous studies that predominantly focused on round tube configurations, this research investigates the impact of vortex generators and geometrical parameters on plain-fin flat-tube designs. Using ANSYS Fluent, the study evaluated the effects of fin geometry, vortex generators, and flow conditions on thermal–hydraulic performance. The key findings revealed that vortex generators enhanced heat transfer by 5–48% by promoting fluid mixing and turbulence but also leading to an increment in friction losses reaching 35–62%, depending upon the number of vortex generators. Condensation rates increased downstream of vortex generators due to enhanced mixing with cooler surfaces. In terms of thermal–hydraulic performance, specific plain-fin configurations outperformed others, offering efficient heat transfer with relatively lower friction losses, even when compactness was considered. Some configurations were recommended for applications where heat exchanger size is less important, but high heat transfer is crucial. Lastly, it was discovered that the effect of vortex generators is more pronounced for lower to intermediate pumping powers per unit area. New empirical correlations were also derived to predict thermal–hydraulic behavior based on geometry and vortex generator placement. A comparison with the literature revealed significantly higher performance as compared to convex/concave vortex generators. Lastly, it was discovered that the effect of vortex generators is more pronounced for lower to intermediate pumping powers per unit area. Empirical correlations for " j " and " f " were correlated with all geometric parameters.

Performance Enhancement of Finned Tube Heat Exchanger using New Vortex Generator

Numerical Study of Thermal Performance on Fin and Tube Heat Exchanger with Flat Rectangular and Sinusoidal Winglet Vortex Generators

Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Thermal performance assessment in a fin-and-oval-tube heat exchanger with delta winglet vortex generators

Thermal-hydraulic analysis of wetted airside plain fin flat tube heat exchangers and the role of vortex generators

Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators

Thermal-hydraulic characteristic of a novel wavy fin-and-circle tube heat exchanger with concave curved vortex generators

Parameters Optimization of Fin-and-Tube Heat Exchanger with a Novel Vortex Generator Fin by Taguchi Method

A Numerical Study of Flow and Heat Transfer Enhancement Using an Array of Delta-Winglet Vortex Generators in a Fin-and-Tube Heat Exchanger

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators

The optimal longitudinal location of curved winglets for better thermal performance of a finned-tube heat exchanger

Experimental and numerical investigations of tube inserted with novel perforated rectangular V-shape vortex generators

Improvement of Plate-Fin Heat Exchanger Performance with Assistance of Various Types of Vortex Generator

Multi-objective Optimization of Heat Transfer Performance of H-type Fin with Vortex Generator Based on NSGA-II

A comprehensive review on vortex generator supported heat transfer augmentation techniques in heat exchangers

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach