Thermodynamic and heat transfer models for refueling hydrogen vehicles: Formulation, validation and application
Jinsheng Xiao,Nianfeng Xu,Wenchao Cai,Xin Zhou,Pierre Bénard,Richard Chahine,Liang Tong,Tianqi Yang
DOI: https://doi.org/10.1016/j.ijhydene.2023.06.081
IF: 7.2
2023-06-27
International Journal of Hydrogen Energy
Abstract:Compression is currently the preferred storage technology for hydrogen vehicles due to its quick refueling process and relatively simple design. However, the temperature rise associated with fast filling must be controlled to ensure its safe operation. This article discusses general heat transfer models based on the mass and energy balance equations for the refueling process of the compressed hydrogen storage tank. Depending on the way of treating the geometric structure of the storage tank, three general lumped parameter models of single-zone (hydrogen), dual-zone (hydrogen and tank wall) and triple-zone (hydrogen, tank wall liner and shell) are built. The general single-zone and dual-zone models are reduced to some special cases which have been published. Under adiabatic and diathermic conditions, four models, including single-zone, dual-zone single-temperature (hydrogen temperature), dual-zone dual-temperature (hydrogen and tank wall temperatures) and triple-zone triple-temperature (hydrogen, tank wall liner and tank wall shell temperatures), are implemented using Matlab/SimulinkTM to simulate the hydrogen refueling process under corresponding conditions. Analytical solutions of single-zone and dual-zone lumped parameter models are derived. The temperature rises of the compressed hydrogen storage tank are described by comparing the analytical solution with the numerical solution. The proposed general models were applied to estimate the final hydrogen temperature and mass, the SOC, the refueling time, and the precooling hydrogen temperature, reviewed and summarized in this article. The analytical solutions of the heat transfer during hydrogen refueling can provide theoretical guidance for improving the refueling efficiency and enhancing refueling safety.
energy & fuels,electrochemistry,chemistry, physical