Abstract:Experiments are performed to investigate the propagating characteristics of rotating detonation fueled by hydrogen in disk-shaped combustors with different configurations. Three combustor configurations are employed in the experiments, and the channel convergence ratio is ranged from 1.0 to 2.61. The mass flow rate varies from 50 to 450 g/s, and the equivalence ratio is ranged from 0.4 to 2.75. The operation maps including single-wave, symmetric dual-wave, asymmetric dual-wave and triple-wave rotating detonation mode are plotted in this study. The results indicate that the propagation process of rotating detonation wave is more stable when the combustor channel area remains constant. Engine exit convergence is beneficial to increase the intensity of rotating detonation wave and detonation-wave parameters, but “two-plane wall” engine with excessive radial-part convergence ratio would reduce the detonation combustion efficiency, thereby reducing the detonation-wave parameters. Additionally, adding exit convergence or increasing the radial-part convergence makes the wave structure in the rotating detonation combustor more complex. The wave-head number in the combustor increases with an increase in the mass flow rate. At some special conditions, the asymmetric dual-wave mode and triple-wave mode are obtained in the combustor with large radial-part convergence ratio or adding exit convergence. For one propagation mode, its operating scope under the three configurations partially coincides, but the upper and lower limits of equivalence ratio and the operating scope of mass flow rate are greatly affected by the combustor configuration. Adding exit convergence can reduce the critical mass flow rate of modes switching, and broaden the stable operation range of the engine, but the “two-plane wall” engine with excessive radial-part convergence ratio could reduce the operating stability and its operating range.

Study on the Influencing Factors of Modal Transformation of Continuous Rotating Detonation Wave Propagation

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Operational Mode Transition in a Rotating Detonation Engine

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Change in Continuous Detonation Wave Propagation Mode from Rotating Detonation to Standing Detonation

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Investigating Rotating Detonation Mode Fueled by Precombustion Cracking Gas

Study of the characteristics and combustion efficiency of liquid kerosene/oxygen-enriched air rotating detonation wave with different modes

Numerical study on droplet evaporation and propagation stability in normal-temperature two-phase rotating detonation system

Propagation characteristics of hydrogen-air rotating detonation wave in disk-shaped combustors with different configurations

Propagation behavior of rotating detonation waves with premixed kerosene/air mixtures

Origin and chaotic propagation of multiple rotating detonation waves in hydrogen/air mixtures

Numerical Simulation of Wave Mode Transition in Rotating Detonation Engine with OpenFOAM

The feasibility of mode control in rotating detonation engine

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Effects of Reversed Shock Waves on Operation Mode in H2/O2 Rotating Detonation Chambers

Propagation Behaviors of Rotating Detonation in an Obround Combustor

Rotating Detonation Instabilities in Hydrogen-Oxygen Mixture

Numerical investigation on the rotating detonation critical mode for a methane–air mixture in an annular tube using reactive Navier–Stokes equations

Simulation of wave mode switching in a rotating detonation engine with gaseous and liquid fuel

Stability investigation of two-phase n-decane rotating detonation waves