Abstract:Biomass is a green source of power since it has minimal to no impact on biodiversity and offers global security for ecological sustainability. Gasification is a thermochemical procedure that turns a source into a by-product (fuel gas). Biomass has an edge over carbon fuels because it is sustainable. It acts as a steady source of feedstock and works as a viable candidate for energy production because it is sustainable. A few other negative repercussions of their extraordinary use include the persistent unpredictability of demand and supply for fossil fuels, environmental harm, and the consequences of climate change. Different factors, such as temperature, particle size, biomass composition, gasifier design, operating conditions, etc., have an impact on a biomass gasifier's efficiency. During gasification, a number of simultaneous reactions actually happen, and some components can serve as both reactants and products. We are reporting for the first time the optimization of biomass mixture (sugarcane bagasse and sawdust) along with equivalence ratio and air flow rate. Preliminary experiments were conducted to ascertain the range and levels of operations of three factors, such as equivalence ratio (ER), air flow rate, and biomass ratio. Optimization involving Box-Behnken design was utilised to decipher the effect of three influencing parameters such as biomass mixture of sugarcane bagasse and sawdust (25%, 50%, and 75%); low air flowrates (10.5, 13.0, and 16.5 L/hr) and equivalency ratios (0.2, 0.3, and 0.4) on gas yield, tar yield, and gas heating value of biomass using an Intrinsic circulating fluidized-bed reactor. All stochastic parameters validated our model. An optimal gas yield, tar yield, and gas heating value of 1.881 Nm3/Kg, 11.360, and 8.188 were predicted at an equivalence ratio (ER) of 0.3, air flow rate of 16.5 L/h, and biomass ratio of 0.75 (75% sugarcane bagasse to 25% sawdust ratio) at a desirability of 1.00. The experimental values were found to be: gas yield (1.867 Nm3/Kg), tar yield (14.0 g/Nm3), and gas heating value (8.15 MJ/Nm3). Trialswere conducted in-order to warrant the predicted circumstancesand the results were found to be correlated with experimental values. Keywords Gasification, gas yield, tar yield, gas heating value, biomass combination.

An operating parameter study of the biomass solid feedstock incinerator of fixed-bed type with two stage air supply

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Comparison of Gasification Performances Between Raw and Torrefied Biomasses in an Air-Blown Fluidized-Bed Gasifier

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

Characterizing Dynamic Relationships Between Burning Rate and Pollutant Emission Rates in a Forced-Draft Gasifier Stove Consuming Biomass Pellet Fuels.

Operational and Design Factors in Air Staging and Their Effects on Fouling from Biomass Combustion

Impact of Operating Parameters on Biomass Gasification in a Fluidized Bed Reactor: an Eulerian-Lagrangian Approach

Optimizing Supply Airflow and Its Distribution Between Primary and Secondary Air in a Forced-Draft Biomass Pellet Stove.

Numerical Investigation of MSW Combustion Influenced by Air Preheating in a Full-Scale Moving Grate Incinerator

Systematic Mass and Energy Evaluation of Biomass Staged Gasification System Based on Thermodynamic and Kinetic Equilibrium Approaches

Numerical Analysis of the Combustion of Gases Generated during Biomass Carbonization

Novel Modeling Tool for Fixed-Bed Biomass Gasification Using High-Temperature Air

Steady and transient state behavior of a gasification process under fixed-bed downdraft configuration

Aspen Simulation Study of Dual-Fluidized Bed Biomass Gasification

Numerical investigation of gas thermal property in the gasification process of a spouted bed gasifier

A Systematic Approach to Determining the Kinetics of the Combustion of Biomass Char in a Fluidised Bed Reactor

Emission and Operational Characteristics Analysis of Axially Staged Combustors Based on Overall Parameters

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

Experimental Investigation and Mathematical Modelling of Wood Combustion in A Moving Grate Boiler

MATHEMATICAL MODELING AND NUMERICAL STUDY OF BIOMASS FIXED CARBON GASIFICATION IN A DENSE BED AT ATMOSPHERIC PRESSURE. PART 2. ANALYSIS OF NUMERICAL RESULTS

Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier