Abstract:Purpose The three-axis simulator relies on the air film between the air bearing and the bearing seat to achieve weightlessness and the frictionless motion condition, which is essential for simulating the micro-disturbance torque of a satellite in outer space. However, at the beginning of the experiment, the disturbance torque caused by the misalignment between the center of gravity of the simulator and the center of rotation of the bearing is the most important factor restricting the use of the space three-axis simulator. In order to solve this problem, it is necessary to set the balance adjustment system on the simulator to compensate the disturbance torque caused by the eccentricity. The paper aims to discuss these issues. Design/methodology/approach In this paper, a study of L1 adaptive automatic balancing control method for micro satellite with motor without other actuators is proposed. L1 adaptive control algorithm adds the low-pass filter to the control law, which in a certain sense to reduce the high-frequency signal and speed up the response time of the controlled system. At the same time, by estimating the adaptive parameter uncertainty in object, the output error of the state predictor and the controlled object can be stabilized under Lyapunov condition, and the robustness of the system is also improved. The automatic balancing method of PID is also studied in this paper. Findings Through this automatic balancing mechanism, the gravity disturbance torque can be effectively reduced down to 10 −6 Nm, and the automatic balancing time can be controlled within 7 s. Originality/value This paper introduces an automatic balancing mechanism. The experimental results show that the mechanism can greatly improve the convergence speed while guaranteeing the control accuracy, and ensuring the feasibility of the large angle maneuver of spacecraft three-axis simulator.

Dynamic pressure-based rocket PID parameters adaptive adjustment method and application

Adaptive Adjustable Performance Function Based Direct Prescribed Performance Control for Spacecraft Flying Around Mission

An Optimization Method of Attitude Control Parameters Based on Genetic Algorithm for the Boost-Glide Rocket

Adaptive Control of Mini Space Robot Based on Linear Separation of Inertial Parameters

Novel PID Controller Parameters Tuning Method.

Modelling And High-Precision Constant Pressure Control Of The Pneumatic Suspension System

Expert-PID Synchronization Control of Thrust Hydraulic System

A Gradient Optimization Based PID Tuning Approach on Quadrotor

Utrahigh Pressure Control Method Based on Fuzzy PID

Posture Control of a 3-RPS Pneumatic Parallel Platform with Parameter Initialization and an Adaptive Robust Method

Modeling and Control of the Pneumatic Constant Pressure System for Zero Gravity Simulation

PID Parameters Auto-Tuning Method for Industrial Temperature Adjustment

Design and Verification of Attitude Control System for a Boost-Glide Rocket

Robust Sensor Optimization for Liquid Propellant Rocket Engine Model Parameter Estimation

An improved control strategy of single neuron PID

Use Orthogonal Experimental Method to Regulate PID Parameters

Adaptive Pressure Control for Use in Variable-Thrust Rocket Development

Control Parameters Design of Spraying Robots Based on Dynamic Feedforward

Study on Dynamic Balance PID Control Algorithm and Its Application on the Quadrotor

A study of PID and L1 adaptive control for automatic balancing of a spacecraft three-axis simulator

Integrated design optimization of structural bending filter and gain schedules for rocket attitude control system