Abstract:Conventional flighted rotary drums usually have flights parallel to the rotating axis, which cannot facilitate the axial motion of the materials in the drum. Here, a new type of horizontal rotary drum with inclined flights and beads was designed. Inclined flights are used to facilitate the axial movement of beads and material, while beads are used as fillers to increase the gas-liquid contact area and to crush the solid materials. We simulated the drum and studied the axial motion of fillers using the discrete element method (DEM). To improve the mass and heat transfer performance, we optimized the distribution of beads in the active phase. The effects of the rotational speed, joint angle, and inlet flow rate in the drum were investigated systematically. The individual effects were evaluated in terms of the mass of particles in the active phase (MAP) and passive phase (MPP), the percentage of the active phase occupied by the particles (OAR), and the axial speed (AS). The response surface methodology (RSM) was used to investigate the significant effects of the interaction between the parameters. The maximum MAP value can be obtained by the following parameters: a rotational speed of 37 rpm, joint angle of 139°, and inlet flow rate of 7.83 kg/s. The interaction between rotational speed and inlet flow rate is the most significant for MAP. The joint angle and inlet flow rate have a significant interactive effect on AS. Besides, the rotational speed, joint angle and inlet flow rate show an interactive effect on OAR and AS. Based on the optimization results, the effect of the inclined angle on the axial motion of beads was also evaluated. The axial motion of the beads occurs mainly in the active phase. Compared to the drum without inclined flights, the drum with inclined flights has an enhanced axial speed increased by 26%. This study will be helpful for the design and optimization of drums with inclined flights.

Study on the Motion Characteristics of Abrasive Media in Vibratory Finishing

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Effects of Horizontal Vibration Assistance on Surface Roughness in Magnetic Abrasive Finishing

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Preliminary Study of Disc Hydrodynamic Polishing

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Numerical Investigation of a Vertical Roller Mill Using DEM-MBD Coupling Method

Investigation of the Ball Wear in a Planetary Mill by DEM Simulation

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Superfinishing Technology Test for Ceramic Cylindrical Rollers

Experimental investigation for vibration reduction of surface-textured journal bearings

Convection and motion characteristics of granular media in horizontal vibratory finishing

Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method

Experiment and Simulation of Liquid Film Flow Driving Abrasive Particle Dispersion on the Surface of a Rotating Disk

Role of dry media in influencing performance during processing by centrifugal superfinishing

Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishing

Directivity Process Modelling for the Figure Error Correction of Dual-Rotation Magnetorheological Finishing

Theoretical and experimental investigation into the formation mechanism of surface waviness in ultra-precision grinding

On surface texture evolution in abrasive flow machining

DEM Simulation of a Rotary Drum with Inclined Flights Using the Response Surface Methodology