Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Tungsten carbide core 12.7x99 mm AP projectiles ballistic behavior against high hardness steel armor

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Research on anti-penetration performance of composite armor of steel/composite materials

Study of Armor-Piercing Self-Sharpening Properties of 88Wc-12Co Material

Numerical simulation of the penetration resistance of ceramic composite armor with corrugated structure

Study on the Penetration Power of ZrO2 Toughened Al2O3 Ceramic Composite Projectile into Ceramic Composite Armor

Study on the Penetration Power of ZrO<sub>2</sub> Toughened Al<sub>2</sub>O<sub>3</sub> Ceramic Composite Projectile into Ceramic Composite Armor

Evaluation of Steel and Tungsten Carbide Cobalt (WC 8Co) 5.56 x 45 mm Caliber Projectile Penetration into Silicon Carbide (SiC) Experiment and Numerical Simulation

Study of Impact Characteristics of ZrO2 Ceramic Composite Projectiles on Ceramic Composite Armor

Study on the Penetration Performance of a 5.8 mm Ceramic Composite Projectile

Experimental Research on Tungsten Alloy Spherical Fragments Penetrating into Carbon Fiber Target Plate

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Study of Residual Projectile of Two Kinds of Penetrators

A Comparative Numerical Analysis on the Effect of Welding Consumables on the Ballistic Resistance of SMAW Joints of Armor Steel

Characterization of Microstructure, Phase Composition, and Mechanical Behavior of Ballistic Steels

Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates

Penetration Characteristics of Ceramic/Metal Composite Armor Impacted by Different Projectiles

Design of an add-on ceramic composite armour against 14.5x114 mm API/B32 projectile for the armoured vehicles and investigation of the ballistic performance of the armour

On the Ballistic Perforation Performance of Additively Manufactured 316L Stainless Steel Cylindrical Projectiles

Resistance of composite target against combined effects of large caliber projectile penetration and successive charge explosion