Abstract:Experimental investigations of dynamic characteristics of the check valve are a contribution work to provide boundary condition to check valve mathematical simulation. The closure process of the check valve was tested. The changing processes of inlet and outlet pressure were performed. Based on the experiment system and the measured quantities, mathematical models were established to study the test. Numerical calculation was mainly focus on when valve starting to close and the closing characteristic time. The paper simulated the different minimum velocities that the valve started to close at. Simulation results approximated to test data when the check valve started to close at a larger flow velocity and a shorter closing characteristic time. The closing characteristic time was discussed when check valves closing on a certain velocity. Following the closure rule of check valve got during the simulation, the paper studied the check valve acting on a long distance pumping system. Two part contents were studied: only check valve arranged along pipeline, both air admission valve and check valves arranged. Along the pipeline seven check valves were arranged, the pump power failure condition was calculated and check valves were closed because of the flow velocity decreased The result showed negative pressure was large when installed just a finite number of check valves along pipeline. Gas admission valves were arranged to negative pressure prevention. Two check valves were respectively arranged at the pump outlet and pipeline. The pressure transient peak at pump outlet will be dropped a lot with the check valve at pipeline closed; the maximum pressure transient peak along pipeline is appeared at check valve outlet on the pipeline under the pump power failure condition. The negative pressure in front pipes could be prevented by installing gas admission valve. Through the check valves and gas admission valves combined action, both the pressure and backflow were well controlled.

Experimental Investigation of the Steady-State Flow Field with Particle Image Velocimetry on a Nozzle Check Valve and Its Dynamic Behaviour on the Pipeline System

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Development of In-out-burst Pneumatic On/off Valve

Study on ultrahigh pressure and large flow rate pneumatic on-off valve

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Numerical visualization of flow field in complex passages of periodical fast switch valve

CFD Analysis for Dynamic Property of a Pilot-Operated Cut-Off Valve in Vertical Pipeline

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

Research on the performance of check valve at a long distance pumping system

Effects of Valve Disc on Flow Characteristics Inside a Swing Check Valve During Opening and Closing Processes

Experimental investigation of internal and external flow fields of jetting nozzles with different structures

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Numerical Simulation and Structure Improvement of Double Throttling in A High Parameter Pressure Reducing Valve

Three-dimensional numerical investigation of solid particle erosion in gate valves

Transient Simulation of Valve Core Movement of Pilot-Control Globe Valve in Vertical Pipelines

Numerical Simulation of the Gas-Solid Flow Around the Valve of Pneumatic Conveying System

Numerical Study on the Internal Flow Field Characteristics of a Novel High-Speed Switching Control Valve

Simulation of Unsteady Flow Characteristics of the Reciprocating Pump Check Valve for High Pressure and High Flow Water Medium