Abstract:Recently tetrapod piled jacket (TPJ) foundations are considered as a promising solution for offshore wind turbines in waters with depths ranging from 20 m to 50 m. This paper presents a numerical study into the monotonic lateral loading behaviour of TPJ foundations in medium sand, in terms of overall load-displacement responses of TPJ foundations and internal force within individual corner piles as well as pile-soil interaction. The results of previous centrifuge model tests are used to provide high-quality verification for the development of a 3D finite element model established by ABAQUS. A series of parametric studies is then carried out to look into more detailed response of TPJ foundations subjected to lateral loads, including the influence of spacing and slenderness ratio of piles, loading height as well as soil friction angle. The numerical results show that there are two various deformation models of TPJ foundations during lateral loading. One is shearing dominated deformation model under smaller loads, while another one is overturning dominated model under larger loads. Moreover, the lateral soil-pile interaction is found to be greatly influenced by enhancing/weakening effects of the axial forces of individual piles. The cause of this phenomenon is primarily due to the change in soil stress induced by pile vertical movement and radial deformation. To quantify this effect on pile-soil interaction of TPJ foundation, an enhancement factor Gamma(s), defined as the ratio of the soil resistance on downwind piles to that on upwind piles, is proposed. Consequently, the relationship between Gamma(s), depth of influence zone z(c )and four parameters are carefully investigated. For simplicity, the Gamma(s) is assumed constant and independent with pile lateral deflection as well as soil depths, based on which the values for Gamma(s) and z(c) are recommended for practical design uses. It is highlighted in the present study that these values should be chosen based on the specific loading conditions to provide much safer and more robust design for TPJ foundations.

Centrifuge testing of a tolerably mobile subsea foundation: exploring the effect of soil type on the evolution of whole-life resistance and settlement

Centrifuge Modelling of Lateral Cyclic Behaviour of a Tetrapod Piled Jacket in Soft Clay

Theoretical framework for predicting accumulation of soil berms and peak sliding resistance for tolerably mobile foundations

Centrifuge model test on suction caisson foundation in soft clay subjected to lateral loads

Long-Term Lateral Cyclic Response of Suction Caisson Foundations in Sand

Experimental Study on Vertical and Lateral Behaviour of Open Caisson Foundations in Clay

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

An Investigation into the Lateral Loading Response of Shallow Bucket Foundations for Offshore Wind Turbines Through Centrifuge Modeling in Sand

Centrifuge Modelling of Wave-Induced Seabed Response in Clay

Centrifuge tests exploring the cyclic performance of suction bucket foundations in cohesionless soils

Centrifuge Modeling of a Saturated Clay Ground under Cyclic Loading

Seepage Induced Soil Failure and Its Mitigation During Suction Caisson Installation in Silt

Centrifuge Test Of Dry Sand And Saturated Sand Ground Seismic Response Under Earthquake Sequence

Effect of Initial Pore Pressure on Undrained Shear Behaviour of Fine-Grained Gassy Soil

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

Centrifuge tests on the consolidation behaviour of foundations under alternating loads

Modelling the degradation of penetration resistance during cyclic T-bar tests in a Gulf of Mexico clay

Centrifuge Model Design for Axially Loaded Structures under Large Ground Movements

Performance of composite foundations with different load transfer platforms and substratum stiffness over silty clay

Centrifuge Model Test Study on Micro-Pile Reinforcement of Shallow Foundation