Abstract:Previous research found that some organosilicon treatments proved effective in stabilizing waterlogged wood dimensions during drying. The present research aimed to determine the mechanism of wood stabilization by these chemicals to understand their mode of action. The study used chemically (ChP) and biologically degraded (BP) model Scots pine wood treated with Methyltrimethoxysilane (MTMS), (3-Mercaptopropyl) trimethoxysilane (MPTMS), or 1,3-Bis(diethylamino)-3-propoxypropanol)-1,1,3,3-tetramethyldisiloxane (DEAPTMDS). Synchrotron-based X-ray fluorescence microscopy (XFM) was used to investigate the penetration of organosilicons into the wood cellular structure and cell walls, and nanoindentation was used to study the mechanical properties of the treated wood cell walls. All treatments resulted in high volumetric anti-shrink efficiency (ASE V ) values of 74–82%, except for MTMS-treated ChP with an ASE V of 52%. The multiscale XFM results revealed that all applied organosilicons penetrated throughout the whole wooden blocks and deposited in both cell lumina and cell walls. The retention of all applied organosilicons was highest in BP wood, and so was the dimensional stabilization effect. MTMS-treated ChP had the lowest measured cell wall infiltration, which likely contributed to its lower ASE v . DEAPTMDS treatments plasticized the cell walls and resulted in lowered nanoindentation elastic modulus ( E s NI ) and hardness ( H ) for all types of wood. MTMS and MPTMS had modest effects on cell wall mechanical properties, and the effect depended on the type of wood. The final effect of organosilicon treatment on the dimensional wood stabilization and mechanical properties of wood cell walls depended not only on the type of the applied organosilicon but also the type of wood degradation. This means that the treatment cannot be considered universal, and specific approaches are needed for the conservation of individual wooden objects. Although some mechanisms are now better understood, such as the need for organosilicons to infiltrate the cell walls and the plasticizing effect of DEAPTMDS, other aspects will benefit from a more detailed analysis of the molecular interactions between organosilicons and wood polymers.

Surface characterization of wood treated with acidic deep eutectic solvents

Determination of changes in the mechanical and color properties of some wood species treated with shellac

Reactive UV-absorber and epoxy functionalized soybean oil for enhanced UV-protection of clear coated wood

Photodegradation stability of huminated European pine ( Pinus sylvestris L.) microveneers

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

The effect of particle board industry waste tar on the physical and biological durability of wood

Alkaline Pre-Treatment of Softwood Chips Prior to Delignification

Improving color stabilization in thermally modified wood by pretreatment with aluminum sulfate vacuum impregnation

Effects of thermal treatment on air-dried density, color change, average surface roughness, and sound absorption capacity of Scots pine

Simultaneous Improvement of Surface Wettability and UV Resistance of Wood with Lignin-Based Treatments

The behavior of thermally modified wood after exposure in maritime/industrial and urban environments

Discoloration and Surface Changes in Spruce Wood after Accelerated Aging

Improved weathering performance and wettability of wood protected by CeO2 coating deposited onto the surface

Surface Characteristics and Artificial Weathering Resistance of Oil-Based Coatings on the Chemically and Thermally Modified Short-Rotation Teak Wood

Improvement of decorative texture effects, thermal stability, and mechanical properties of Pinus massoniana using a combined dyeing and superhydrophobic modification method

Lewis Acid-Facilitated Deep Eutectic Solvent (DES) Pretreatment for Producing High-Purity and Antioxidative Lignin

Wood Surface Finishing with Transparent Lacquers Intended for Indoor Use, and the Colour Resistance of These Surfaces during Accelerated Aging

Effects of enzymatic hydrolysis and physicochemical properties of lignocellulose waste through different choline based deep eutectic solvents (DESs) pretreatment

........Pelit, Alkan, Yalcin: Decay Resistance and Color Change of Pine and Beech Wood..

Conservation of model degraded pine wood with selected organosilicons studied by XFM and nanoindentation

Tensile and Impact Bending Properties of Chemically Modified Scots Pine