Abstract:Most electrically actuated hydraulic valves utilize solenoids as the actuating element due to their robustness and simplicity. This goes for both onoff and proportional-type valves. However, despite their robustness, solenoid coil malfunction is the largest single failure mode in solenoid actuated valves. An outspoken fault is here solenoid winding short-circuit, i.e., two windings short-circuiting, which may ultimately lead to solenoid failure if more windings short-circuit. Research has therefore also focused on detecting winding short-circuits. Common for the approaches are that they, directly or indirectly, depend on the coil winding temperature, as this directly influences the coil resistance. Alternatively, the approaches are based on injection of high-frequency signals, which is typically a costly solution, which is not a feasible approach for use in hydraulic valves, with the limitations imposed by the control electronics. Therefore, this article focuses on a temperature-independent algorithm to detect coil winding short-circuit, which is easy to implement and only relies on existing position and current sensors. The proposed algorithm is based on an extended Kalman filter, which estimates the coil resistance. As this resistance estimate is indirectly dependent on the coil temperature, a window-based cumulative sum fault detection method is included to detect transient changes in the coil resistance while compensating for the temperature variations. The algorithm is developed based on an experimentally validated model of the valve, and has been tested for several different situations through both simulations and experimentally. Based on the presented results, it is found that the algorithm can consistently detect resistance changes down to 0.11 $Omega$ for constant input signals and down to 0.17 $Omega$ for sinusoidal-varying input signals. This while stillbeing robust to parameter variations, such as increased valve friction, spring coefficients, and sensor signal deviations.

Temperature prediction and winding temperature measurement of a solenoid valve

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

Modeling, Design and Control of High-Speed Powerful Solenoid Based on Giant Magnetostrictive Material

Modeling of Solenoid-Actuated Valve System

Development of a Nonlinear Thermal Equivalent Circuit Model for the Digital Valve with Integrated Multiple Coils

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Three-dimensional Simulation and Prediction of Solenoid Valve Failure Mechanism Based on Finite Element Model

Controlling Voltage Computation in Electromagnetic Induction Heating

Numerical Simulation of Leakage Noise Field for Solenoid Valve

Failure Mechanism Study of Direct Action Solenoid Valve Based on Thermal-Structure Finite Element Model

A Vibration-Based Measurement Method for Dynamic Characteristic of Solenoid Switching Valve

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

The Impact of Temperature on the Electromagnet and Structural Optimization of a Solenoid Valve

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Numerical Simulation of the Head of the Direct Action Solenoid Valve under the High Temperature Condition

Dynamic Optimization Method of High-speed Solenoid Valve Parameters

Temperature relevant performance and calibration of spin-valve sensor

Temperature-Independent Fault Detection of Solenoid-Actuated Proportional Valve

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Fast Dynamics and Low Power Losses of High-Speed Solenoid Valve Based on Optimized Pre-Excitation Control Algorithm

Simulation and optimisation design of the solenoid valve