Abstract:The primary goal of the research is to develop a resilient material for electromagnetic interference (EMI) shielding. This study investigates the mechanical, dielectric, and electromagnetic interference (EMI) shielding properties of a composite material reinforced with biocarbon extracted from abaca bract and pineapple fiber in a rigid vinyl ester matrix. The biocarbon is obtained through a pyrolysis process, ensuring its origin from sustainable sources. The fabrication process involves employing the hand layup method, adhering to ASTM standards for comprehensive characterization. Among the fabricated composites, VB3, featuring 2 vol% of biocarbon and 40 vol% of pineapple mat fiber, stands out for exhibiting superior mechanical properties. It achieves a tensile strength of 143 MPa, flexural strength of 184 MPa, compression strength of 161 MPa, and impact energy of 4.31 J. Conversely, VB4, with a higher volume of biocarbon, experiences a slight reduction in mechanical properties attributed to biocarbon agglomeration, while showcasing an enhanced Shore-D hardness of 82. Silane treatment of both pineapple fiber and biocarbon contributes to improved adhesion in the matrix. In terms of electromagnetic interference (EMI) shielding, VB4 surpasses others, delivering maximum shielding effectiveness with total shielding values of 11.18 dB, 30.53 dB, 54.16 dB, and 65.51 dB for frequency bands at 8 GHz, 12 GHz, 16 GHz, and 20 GHz. Similarly, in dielectric properties, VB4 outperforms other designations with a dielectric constant of 9.8, 7.4, 5.8, 4.5, and dielectric loss values of 0.15, 0.31, 0.42, and 0.5 for the respective frequency bands. Moreover, increased biocarbon content further enhances the hydrophobic behavior of the matrix in VB4, achieving a water contact angle of 97°.These findings highlight the multifunctional capabilities of VB4, demonstrating not only superior mechanical strength and EMI shielding but also enhanced dielectric properties and hydrophobic nature. The comprehensive approach to incorporating biocarbon and pineapple fiber, coupled with silane treatment, contributes to the overall performance and versatility of the composite material.

Characterization of prickly pear short fiber and red onion peel biocarbon nanosheets toughened epoxy composites

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Mechanical, wear and fatigue behavior of silane‐treated corncob biosilica toughened epoxy resin composite reinforced with prickly pear short fibers

Mechanical, Wear and Fatigue Behaviour of Neem Oil and Nanosilica Toughened Areca Fibre Reinforced Epoxy Resin Composite

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Preparation and properties of carbon‐based epoxy nanocomposites: Dynamic mechanical, dielectric, and thermal properties

Characterization of Silane Treated Opuntia Short Fibre and Bagasse Biosilica Toughened Epoxy Resin Composite

Effect of palmyra sprout fiber and biosilica on mechanical, wear, thermal and hydrophobic behavior of epoxy resin composite

Physico‐mechanical, and thermal properties of sisal/hemp/Kevlar fibers, fly ash and Titanium Carbide nanoparticles reinforced bioepoxy composites

Mechanical, Thermal Conductivity and Water Absorption of Hybrid Nano-Silica Coir Fiber Mat Reinforced Epoxy Resin Composites

Thermal, mechanical, and morphological properties of oil palm cellulose nanofibril reinforced green epoxy nanocomposites

Annealed peanut shell biochar as potential reinforcement for aloe vera fiber-epoxy biocomposite: mechanical, thermal conductivity, and dielectric properties

Carbon Nanotube/Cu Nanowires/Epoxy Composite Mats with Improved Thermal and Electrical Conductivity

Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets

Investigation on DMA, Fatigue and Creep Behaviour of Rice Husk Ash Biosilica-Prickly Pear Short Fibre-Reinforced Epoxy Resin Composite

Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite

Effect of silane treatment on corn husk and tamarind fiber and betel nut filler on fatigue, thermal conductivity, and machining behavior of epoxy biocomposites

Enhanced toughness and thermal conductivity for epoxy resin with a core–shell structured polyacrylic modifier and modified boron nitride

Carbon Nanoparticles’ Impact on Processability and Physical Properties of Epoxy Resins—A Comprehensive Study Covering Rheological, Electrical, Thermo-Mechanical, and Fracture Properties (Mode I and II)

Enhancing mechanical, thermo-mechanical and low velocity impact properties of epoxy methyl ricinoleate toughened epoxy composites by integrating microcrystalline cellulose

Characterization of mechanical, dielectric, EMI shielding properties of abaca bract biocarbon and pineapple fiber reinforced rigid vinyl ester composite