Abstract:An SMA (shape memory alloy) is a functional material with a unique property known as the shape memory effect, or superelasticity. Microscopically, the mechanical actuation of this effect is based on reversible transformation between different crystal phases. To clarify the atomistic mechanism in SMA, we perform molecular dynamics simulation (MDS) of phase transformations for a Ni-Ti alloy, a typical alloy used for engineering SMAs. EAM potential, which can produce both B2 and B19' structures (stable crystal phases of Ni-Ti), is adopted to model the interatomic interaction of the nickel and titanium atomic systems. Two different-sized MDS models are constructed with unit cell structures of B2 phase. These structures are surrounded by free surfaces and constrained regions so as to be subjected to uniaxial tensile loading. A series of reversible processes likely to occur in SMA, including loading, unloading, heating, and cooling, is reproduced by corresponding stages of the MDS. Phase transformation is thought to be observable by detecting the local interatomic distances and bonding angles peculiar to B19' structure (martensite). During tensile loading simulations, the martensite crystal structure is always observed, having transformed from the B2 structure. At a large strain, models exhibit a rapid propagation of local lattice distortions accompanied by the formation of martensite. In unloading simulations, the larger model contains relatively less martensite than the smaller model. The discrepancy with regards to model size may depend on a different degree of constraint strength. Reverse transformation (from B19' to B2) occurs mainly in the subsequent heating stage, in which the stress is observed to increase under constant residual strain.

Characterization and Applications of Titanium alloy with Nickel and Niobium based Shape memory alloys by Molecular Dynamic Simulation–A review

Simulation of the shape memory effect in a NiTi nano model system

A Critical Review on Nickel–Titanium Thin-Film Shape Memory Alloy Fabricated by Magnetron Sputtering and Influence of Process Parameters

Elevated Temperature Deformation Behavior of Novel NiTiAg Shape Memory Alloys: A Comparison Between Various Constitutive Models and Experimental Flow Curves

Assessment of Biocompatibility and Physical Properties of Ni–Ti–Zr–Nb Shape Memory Alloys

OPTIMIZATION OF NICKEL CONTENT ON SOME PROPERTIES OF (NITI) SHAPE MEMORY ALLOY

Molecular Dynamics Simulations of PtTi High-Temperature Shape Memory Alloys Based on a Modified Embedded-Atom Method Interatomic Potential

Review on the Β-Ti Based High Temperature Shape Memory Alloys

A review of NiTi shape memory alloy as a smart material produced by additive manufacturing

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

Processing of Shape Memory Alloys research, applications and opportunities: A Review

Shape Memory Behaviour of PMMA-Coated NiTi Alloy under Thermal Cycle.

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

Martensitic Transformation and Shape Memory Effect of Ti-Ni Based High Temperature Shape Memory Alloys

Nickel-titanium shape memory alloys made by selective laser melting: a review on process optimisation

Observation of Phase Transformation and Structural Analysis for Ni-Ti Alloy by Molecular Dynamics Simulation

Development of TiNi-Based Shape Memory Materials and Their Applications

Microstructure and Shape Memory Behavior of Ti-Nb Shape Memory Alloy Thin Film

High accuracy neural network interatomic potential for NiTi shape memory alloy

Study of ageing and size effects in Nickel–Titanium shape memory alloy using molecular dynamics simulations