Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Elevated Temperature Deformation Behavior of Novel NiTiAg Shape Memory Alloys: A Comparison Between Various Constitutive Models and Experimental Flow Curves

Recent Development of TiNi‐Based Shape Memory Alloys with High Cycle Stability and High Transformation Temperature

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

Strain Rate Effect on the Thermomechanical Behavior of NiTi Shape Memory Alloys: A Literature Review

Experimental Investigation on the Mechanical Instability of Superelastic NiTi Shape Memory Alloy

Influence of Cobalt on the Hot Deformation Characteristics of an NiTi Shape Memory Alloy

A micromechanical constitutive model of high-temperature shape memory alloys

Thermodynamic Performance Test and Phenomenological Constitutive Model of NiTiNb Shape Memory Alloy

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Cryogenic temperature deformation behavior and shape memory mechanism of NiTiFe alloy

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

One-Dimensional Constitutive Model of Shape Memory Alloy with an Empirical Kinetics Equation

Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression

OPTIMIZATION OF NICKEL CONTENT ON SOME PROPERTIES OF (NITI) SHAPE MEMORY ALLOY

Mechanical Evaluation of Selective Laser Melted Ni-Rich NiTi: Compression, Tension, and Torsion

Experimental Investigation on Local Mechanical Response of Superelastic NiTi Shape Memory Alloy

Comparative study on mechanical and shape memory properties of hot forged NiTiNb in axial and radial direction

Data-driven study of composition-dependent phase compatibility in NiTi shape memory alloys

Data-driven shape memory alloy discovery using Artificial Intelligence Materials Selection (AIMS) framework

Dissecting functional degradation in NiTi shape-memory-alloys containing amorphous regions via atomistic simulations

Effect of plasticity on superelasticity and hysteretic dissipation of NiTi shape memory alloy