Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Highly Conductive PEO-Based Polymer Composite Electrolyte for Na Battery Applications

Highly Conductive Poly(ethylene oxide)-Based Composite Polymer Electrolyte for Sodium Battery Applications

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

Polyethylene Glycol Functionalized Polyhedral Cage Silsesquioxane As All Solid-State Polymer Electrolyte for Lithium Metal Batteries

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

High electrochemical stability of a 3D cross-linked network PEO@nano-SiO2 composite polymer electrolyte for lithium metal batterie

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

High Li-ion Conductive Composite Polymer Electrolytes for All-Solid-state Li-metal Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes Via Incorporation of POSS-PEG13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

Zwitterionic Cellulose‐based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐performance Solid‐state Batteries

Noncombustible 7 μm-thick solid polymer electrolyte for highly energy density solid state lithium batteries

Unconventional PEO-PPC quasi-solid state blend polymer electrolyte for high efficiency solid-state Li-metal batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Nanohybrid Polymer Electrolytes with Enhanced Safety and Electrochemical Performance

Poly(2-aminoazulene) Filler–Improved PEO-Based Electrolyte for Highly Stable Solid-State Li-Metal Batteries

Controllable magnetic field aligned sepiolite nanowires for high ionic conductivity and high safety PEO solid polymer electrolytes

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

Enabling Scalable Polymer Electrolyte with Synergetic Ion Conductive Channels via a Two Stage Rheology Tuning UV Polymerization Strategy

Promoted ion conductivity of sodium salt–poly(ethylene oxide) polymer electrolyte induced by adding conductive beta-alumina and application in all-solid-state sodium batteries