Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Accuracy Degradation Model and Residual Accuracy Life Prediction of CNC Machine Tools Based on Wiener Process

Cutting tool wear prediction based on the multi-stage Wiener process

Remaining Useful Life Prediction for a Nonlinear Heterogeneous Wiener Process Model With an Adaptive Drift

Reliability prediction of machinery with multiple degradation characteristics using double-Wiener process and Monte Carlo algorithm

Remaining useful life prediction for an adaptive skew-Wiener process model

Non-linear Wiener process–based cutting tool remaining useful life prediction considering measurement variability

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

Support Vector Machine and Neural Network United System for NC Machine Tool Thermal Error Modeling

Machining accuracy prediction and adaptive compensation method of CNC machine tool under absence of machining process sensing

Three-Stage Wiener-Process-Based Model for Remaining Useful Life Prediction of a Cutting Tool in High-Speed Milling

Advancements in accuracy decline mechanisms and accuracy retention approaches of CNC machine tools: a review

Modeling left-truncated degradation data using random drift-diffusion Wiener processes

Accelerated Degradation Reliability Modeling Based on Multiple Uncertainty Wiener Processes

Reliability Prediction Model of the CNC System

Data-driven and knowledge-guided prediction model of milling tool life grade

Research on the Milling Tool Wear and Life Prediction by Establishing an Integrated Predictive Model

Performance reliability degradation analysis and lifetime prediction based on generalized normal grey cloud Bayesian Wiener process

A multi-phase Wiener process-based degradation model with imperfect maintenance activities

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Predictive analysis of the precision remaining useful life of CNC machine tools based on meta-action unit