Abstract:Pesticides are used in the agricultural production process to ensure the yield and quality of agricultural products. However, in recent years, environmental pollution issues caused by pesticide residues have sparked widespread concern in society. It is important to develop convenient and efficient approaches to detect and monitor pesticide residues. In this study, targeting benzoylurea insecticides (BUs), polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating (SiO2-PAMAM-PDA) was designed and successfully synthesized. First, monodisperse silica nanoparticles were prepared by the hydrolysis of tetraethyl orthosilicate (TEOS) in mixed solution of ethanol, water and ammonia. The silane coupling agent (3-aminopropyl)triethoxysilane was then employed to introduce amino groups into the silica. Silica with the zeroth generation of polyamidoamine (PAMAM) modification (SiO2-PAMAM-G0) was obtained through Michael addition reaction of methyl acrylate. Ethylenediamine was added to polymerize with methyl acrylate using an amidation reaction to form the first-generation PAMAM (SiO2-PAMAM-G1). Finally, by polymerizing dopamine under alkaline conditions (pH=8.5), the SiO2-PAMAM-G1 was coated with PDA. Thus, the final product named SiO2-PAMAM-PDA was obtained. The composite was characterized using a transmission electron microscope (TEM) and an increase in surface roughness indicated the successful grafting of PDA coating. Dopamine structure contains abundant benzene rings and amino and hydroxyl groups. It could bind with BUs through multiple secondary interactions, such as hydrogen bond and π-π stacking interaction. Therefore, the introduction of PDA could effectively enhance the affinity of the material toward benzoylurea insecticides. The prepared nanocomposites were used as sorbents in a dispersive micro solid-phase extraction approach (D-μ-SPE). The established approach was employed to extract and enrich the BUs in water samples before high-performance liquid chromatography (HPLC) analysis. Diflubenzuron, triflumuron, hexaflumuron, and teflubenzuron were chosen as target analytes. The following was a typical D-μ-SPE procedure. The prepared adsorbents measuring 40 mg were first dispersed in an 8-mL sample solution containing 150 g/L NaCl. The dispersion was assisted by 120-s vortexing to ensure full contact between the SiO2-PAMAM-PDA and the targets. Next, the adsorbents were separated from the liquid phase by 4-min centrifugation (5000 r/min). Thereafter, the adsorbed benzoylureas were eluted using 1 mL acetonitrile as desorption solvent by 120-s vortexing. Separated by centrifugation, the eluate was dried under a mild nitrogen stream. The solid remains were redissolved in 0.1 mL of acetonitrile, filtered by filter membrane (0.22 μm), and then analyzed by HPLC. The experimental conditions in the D-μ-SPE process could have a great impact on the extraction efficiency. Experimental conditions were optimized using a single factor optimization approach to further enhance the extraction recoveries. The optimized conditions included adsorbent amount, extraction time, desorption solvent type, desorption solvent volume, desorption time, and NaCl addition amount. Under the optimal conditions, a linearity range of 10-500 μg/L and limits of detection (LODs, S/N=3) of 1.1-2.1 μg/L were obtained. The extraction recoveries and relative standard deviations (RSDs) of the four BUs were 82.8%-94.1% and 2.1%-8.0%, respectively. The established approach was compared with reported approaches targeting benzoylurea insecticides. It was discovered that this approach consumed less sample, material, organic solvent, and pretreatment time. It provided a more rapid and green choice for the determination of benzoylurea pesticides. To determine the applicability, the proposed approach was applied to analyze the four benzoylurea insecticides in three river water samples. The real water samples were pretreated using the developed approach ahead of instrumental analysis, and no benzoylurea pesticides residue was detected. Next, standard addition experiments were performed under three spiking levels, including 15, 50, and 200 μg/L. The established approach had good accuracy and feasibility with satisfactory recoveries (69.5%-99.4%) and RSDs (0.2%-9.5%).

In situ electrodeposition of Cu-BDC metal–organic framework on pencil graphite substrate for solid-phase microextraction of some pesticides

Nanoporous carbon fiber derived from Cu-BDC metal organic framework @pencil graphite as a sorbent for solid phase microextraction of acetamiprid and imidacloprid

A fast and simple procedure for the synthesis of a zinc and 1,4-benzene dicarboxylic acid metal-organic framework and its evaluation as a sorbent for dispersive micro solid phase extraction of pesticide residues

Incorporation of Cu-TATAB metal-organic framework within polyurethane nanocomposite for enhanced thin film microextraction of some chlorinated pesticides

Preparation of graphene-coated solid-phase microextraction fiber and its application on organochlorine pesticides determination

Synthesis of MOF-70 based on diffusion method; microgram amount application as a highly efficient sorbent in dispersive micro solid phase extraction prior to dispersive liquid–liquid microextraction for the preconcentration and extraction of pesticides from fruit juices

Covalent organic framework in situ grown on Fe3O4 hollow microspheres for stir bar sorptive-dispersive microextraction of triazole pesticides

Binder-Free Decorated Cu Cluster-Based Metal-Organic Framework on Copper Film for Thin-Film Microextraction of Polycyclic Aromatic Hydrocarbons Followed by High-Performance Liquid Chromatography-Photo Diode Array Detection

In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

[Polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating for dispersive micro solid-phase extraction of benzoylurea insecticides in water samples]

Dispersive Micro-Solid Phase Extraction Based on a Graphene/polydopamine Composite for the Detection of Pyrethroids in Water Samples

Extraction of pesticides from soil using direct-immersion SPME LC-Tips followed by GC-MS/MS: Evaluation and proof-of-concept

Fe3O4 nanoparticles as matrix solid-phase dispersion extraction adsorbents for the analysis of thirty pesticides in vegetables by ultrahigh-performance liquid chromatography-tandem mass spectrometry

A high-throughput approach for the determination of pesticide residues in cucumber samples using solid-phase microextraction on 96-well plate

Solid phase microextraction arrow-ion mobility spectrometry for determination of selected pesticides in water

Yolk-shell MOF-on-MOF hybrid solid-phase microextraction coatings for efficient enrichment and detection of pesticides: Structural regulation cause performance differences

In-situ growth of a covalent organic framework-based matrix-compatible microextraction coating for sensitive extraction of multiple pesticides

High efficient solid-phase microextraction based on a covalent organic framework for determination of trifluralin and chlorpyrifos in water and food samples by GC-CD-IMS

Development of solid phase extraction with carbon nanoonion-polyaniline composite sorbent followed by microextraction method for the extraction of pesticides residues before gas chromatography

Biopolymers based-dispersive solid phase extraction combined with deep eutectic solvent-based dispersive liquid–liquid microextraction for the extraction of several pesticides from fruit juices prior to GC-FID analysis