Abstract:An on-site dispersive liquid liquid microextraction base on the solidification of switchable solvent has been developed as a simple, rapid and eco-friendly sample extraction method for the fast determination of pyrethroid insecticides in aqueous samples using high-performance liquid chromatography with ultraviolet detection. In this extraction method, medium-chain saturated fatty acids (n >= 10), which can rapidly solidify at low temperatures (<20 degrees C), were investigated as switchable hydrophilic solvents. The fatty acids were converted into the hydrophilic form by adding sodium hydroxide. Microdroplets of the fatty acids were generated when injected into an acidic sample that had been pretreated by the addition of sulfuric acid. The formed cloudy solution was cooled to a low temperature to turn the fatty acids into a solid, which was then separated by filtration, thus avoiding the time-consuming step of centrifugation. The microextraction process was performed in a 10 mL syringe and the pretreatment process could thus be finished in 5 min. No external energy resources were required in this method, which makes it a potential method for on-site extraction. The optimal experimental parameters were as follows: 350 of decanoic acid (1 mol/L) was used as the extraction solvent, 150 mu L of sulfuric acid (2 mol/L) was used to decrease the pH of the samples, no salt was added, and the temperature of the samples was in the range of 20-40 degrees C. Finally, the sample was cooled in an ice bath for three minutes. Under these optimal conditions, good responses for four pyrethroid insecticides were obtained in the concentration ranges of 1-500 mu g/L, with coefficients of determination greater than 0.9993. The recoveries of the four pyrethroid insecticides ranged from 84.7 to 95.3%, with relative standard deviations ranging from 1.6 to 4.6%. The limits of detection based on a signal-to-noise ratio of 3 were in the range of 0.24-0.68 mu g/L, and the enrichment factors were in the range of 121-136. The results demonstrate that this method was successfully applied to determine pyrethroid insecticides in real water samples. No centrifugation or any special apparatus are required, make this a promising method for rapid field-sampling procedures. (C) 2016 Elsevier B.V. All rights reserved.

Dispersive Micro-Solid Phase Extraction Based on a Graphene/polydopamine Composite for the Detection of Pyrethroids in Water Samples

Dispersive Solid-Phase Extraction Based on Β-Cyclodextrin Grafted Hyperbranched Polymers for Determination of Pyrethroids in Environmental Water Samples

Evaluation of Graphene Aerogel Monolith-Based Solid-Phase Extraction for the Separation of Pyrethroids from Water Samples

Solid-phase Microextraction with a Novel Graphene-Coated Fiber Coupled with High-Performance Liquid Chromatography for the Determination of Some Carbamates in Water Samples

Magnetic solid-phase extraction of five pyrethroids from environmental water samples followed by ultrafast liquid chromatography analysis.

Analysis of eight pyrethroids in water samples by liquid–liquid microextraction based on solidification of floating organic droplet combined with gas chromatography

Deep Eutectic Solvent Micro-Functionalized Graphene Assisted Dispersive Micro Solid-Phase Extraction of Pyrethroid Insecticides in Natural Products.

Magnetic solid-phase extraction of pyrethroid pesticides in environmental water samples with CoFe 2 O 4 -embedded porous graphitic carbon nanocomposites.

Magnetic adsorbent based on mesoporous silica nanoparticles for magnetic solid phase extraction of pyrethroid pesticides in water samples

Analysis of Pyrethroid Pesticides in Water Samples by Dispersive Liquid-liquid Microextraction Coupled with Gas Chromatography

Solid-phase extraction based on magnetic core-shell silica nanoparticles coupled with gas chromatography-mass spectrometry for the determination of low concentration pesticides in aqueous samples.

Electropolymerized multiwalled carbon nanotubes/polypyrrole fiber for solid-phase microextraction and its applications in the determination of pyrethroids.

Attapulgite Modified with Covalent Organic Frameworks As the Sorbent in Dispersive Solid Phase Extraction for the Determination of Pyrethroids in Environmental Water Samples

Centrifuge-Less Dispersive Liquid-Liquid Microextraction Base on the Solidification of Switchable Solvent for Rapid On-Site Extraction of Four Pyrethroid Insecticides in Water Samples

A rapid and sensitive analytical method for the determination of 14 pyrethroids in water samples

In-situ Ionic Liquid Dispersive Liquid-Liquid Microextraction Using a New Anion-Exchange Reagent Combined Fe3O4 Magnetic Nanoparticles for Determination of Pyrethroid Pesticides in Water Samples

Effervescence-assisted Β-Cyclodextrin/attapulgite Composite for the In-Syringe Dispersive Solid-Phase Extraction of Pyrethroids in Environmental Water Samples

Sea-urchin-like Covalent Organic Framework As Solid-Phase Microextraction Fiber Coating for Sensitive Detection of Trace Pyrethroid Insecticides in Water

Ultrasound-assisted Dispersive Liquid-Liquid Microextraction Based on a Hydrophobic Deep Eutectic Solvent for the Preconcentration of Pyrethroid Insecticides Prior to Determination by High-Performance Liquid Chromatography

Miniaturized Matrix Solid-Phase Dispersion Combined with Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction for the Determination of Three Pyrethroids in Soil.

Magnetic effervescence-assisted switchable solvent dispersive liquid-liquid microextraction for the determination of pyrethroids in edible fungi