Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Approaches to predicting the characteristics of fireproof materials

RESEARCH OF PROGRESSIVE COLLAPSING CALCULATION METHODS

State-of-the-art of probabilistic performance based structural fire engineering

Mathematical Modeling of Fire-Proof Efficiency of Coatings Based on Silicate Composition

Compatibility of material components in civil engineering

Reduction of response time of fire detection and containment systems in compartments

Fire Safety Research Institute Materials and Products database—A resource to support fire modeling

Mathematical modeling in the management of fire protection systems of objects

ANALYSIS OF FACTORS AFFECTING THE SPREAD OF FIRE BY THE STRUCTURE OF FACADE THERMAL INSULATION WITH VENTILATED AIR LAYER

Studies on Predicting Flashover in Enclosures

Experimental and Analytical Studies of the Toxicity of Combustion Products, Detection and Extinguishing of Fires in the Pressurized Pressure Chambers in Environments Enriched with Oxygen and at the Alevated Pressure

Effect of fire on concrete and concrete structures

Development of Organic-Mineral Fireproofing Composition Based on Liquid Glass and Epoxy Resin

Simple Method for Predicting Temperatures in Insulated, FRP-Strengthened RC Members Exposed to a Standard Fire

Influence of architectural and planning solutions on fire risk in public buildings

Influence of Compartment Fire Behavior at Ignition and Combustion Development Stages on the Operation of Fire Detectors

ANALYSIS OF MODERN METHODS FOR PREVENTING THE SPREAD AND EXTINGUISHING FIRES

Expert thinking phenomenon and methodology of its formation among students in the specialty “Forensic Fire-technical expertise”

Analysis of Paint Properties According to Expandable Graphite and Fire Simulation Research on Firewall Penetration Part

Basic Polymer Material Properties for Flame Spread

The research of bearing capacity of reinforced concrete beam with use combined experimental-computational method