Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Lightweight robotic arms are one of the main technologies to improve the working performance of robotic arms in the future. Focusing on the spatial vibrations issue brought about by the light-weighting of a space robotic arm in this paper, a rigid–flexible coupling dynamics model of a space robotic arm system was established based on the assumed mode method and Lagrange method. Based on the lightweight flexible robotic arm structure, a comparative analysis of the first four mode functions was conducted under different fixed constraints and physical properties to determine the mode order that matches the simulation analysis of this robotic arm, thus, further simplifying the rigid–flexible coupling dynamics equations of the system. The overall rigid model and simplified dynamic model of the robotic arm system were solved by using MATLAB, resulting in a motion trajectory of the flexible arm end in space. The three-dimensional model was validated and simulated using virtual prototype technology under the same joint inputs as the model in MATLAB. The simulation results demonstrated that the trajectory of the end of the flexible arm was basically the same between simplified dynamics model simulation and virtual prototype simulation, and the maximum deviation of the end trajectories of the flexible connecting rods [math] and [math] was less than 18[math]mm and 58[math]mm, respectively. Meanwhile, the trajectory trend of the end of the flexible arm in the two aforementioned models was the same as the simulation results of the ideal model (overall rigid model). The above conclusions can verify the correctness of the mathematical model of dynamics obtained from the calculations in this paper. In addition, the research data showed that the maximum vibration deviation of the flexible arm was stabilized within a certain value range under different joint inputs, and this research also provided theoretical support for the late vibration suppression control of the spatial rigid–flexible coupled robotic arm.

Influence of the Stiffness of the Robotic Arm on the Position of the Effector of an EOD Robot

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Design and Experiments of a Robotic Arm with a Rigid-Soft Coupling Structure

Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics

Model Analysis of Robotic Soft Arms including External Force Effects

Optimal configurations for stiffness and compliance in human & robot arms

Modeling of an On-Orbit Maintenance Robotic Arm Test-Bed

Nonlinear Effects in Stiffness Modeling of Robotic Manipulators

A Dynamic Modeling Method for Soft Pneumatic Robotic Arms Considering Both Geometric Nonlinearity and Visco-Hyperelasticity

Static Stiffness Modeling and Experiments of Polishing Manipulator Arm

Experimental Characterization of Robot Arm Rigidity in Order to Be Used in Machining Operation

Dynamic Manipulation and Stiffness Modulation of Cooperative Continuum Robots: Theory and Experiment

Dynamic Modeling and Optimization Analysis of Rigid–Flexible Coupling Manipulator Based on Assumed Mode Method

On static stiffness modeling of 6R lightweight joint robot

FC-EODR: Immersive Humanoid Dual-Arm Dexterous Explosive Ordnance Disposal Robot

Kinematic Analysis of Novel Soft Robotic Arm Based on Virtual Work Principle.

Optimal Selection of Measurement Configurations for Stiffness Model Calibration of Anthropomorphic Manipulators

Identification of geometrical and elastostatic parameters of heavy industrial robots

Stiffness modeling and distribution of a modular cable-driven human-like robotic arm

Robotica: decoupled elastostatic stiffness modeling of hybrid robots

Design, manufacturing, and inverse dynamic modeling of soft parallel robots actuated by dielectric elastomer actuators