Abstract:This paper provides information regarding the application of niobium in industry and the scale of its production in the world and the Russian Federation. Most of the niobium deposits in Russia consist of pyrochlore, apatitepyrochlore and columbitepyrochlore types of ores. They contain a significant amount of phosphorus. Therefore, all enrichment schemes for these ores contain a dephosphorization stage which increases the price of the product and reduces the degree of niobium extraction. The paper explores the possibility of improving the end-to-end production scheme: niobium ore – beneficiation – niobium ferroalloy. The bulk of ferroniobium is intended for steel microalloying and can be replaced by complex ferroalloys with a reduced niobium content. The paper considers the issues of obtaining complex niobium ferroalloys from a rough concentrate with a weak content of niobium. It has been established that the addition of 25 – 40 % of silicon or 12 – 30 % of aliminum to the twocomponent metal system Fe – Nb causes the transfer of niobium ferroalloys (15 – 20 % Nb) from the refractory category to lowmelting materials. The crystallization temperatures are less than 1400 °C. The substantiation of using a complex niobium ferroalloy instead of ferroniobium is given. This alloy has reduced niobium content and increased silicon or aluminum content. Higher service characteristics of the complex ferroalloy are noted in comparison with ferroniobium (temperature of the initiation of crystallization and density). They indicate an increased assimilation of niobium when using a complex ferroalloy for steel microalloying. The paper presents data on the possibility of dephosphorization of niobium concentrates in the process of pyrometallurgical production of a complex ferroalloy. An improved scheme for the production of niobiumcontaining ferroalloys is proposed. This consists of the use of niobium concentrate for melting the intermediate ferroalloy containing a reduced concentration of niobium oxides and an increased concentration of silicon (aluminum). This ferroalloy can be used effectively for steel microalloying with niobium.

Obtaining of niobium-containing ferroalloys from the Russian ore raw materials

Obtaining of niobium-containing ferroalloys from the Russian ore raw materials

Theoretical and Practical Foundations of the Selective Separation of Phosphate Ions from Phosphate Ores with a High Content of Iron Impurities with the Recirculation Method

Study of Physicochemical Characteristics of Niobium-Containing Oxide Materials. Part 1. Thermodynamic Simulation

Potential for obtaining and applying complex niobium ferroalloys

Reducing Roasting of the Niobium–REM Ores of the Chuktukon Deposit with the Production of Phosphorus Cast Iron and Niobium–REM Slag

Recovery of niobium during comprehensive processing of pyrochlore-monazite-goethite ores

Green and Efficient Pre-concentration of Niobium From Low-Grade Niobite via Super Gravity

Experimental Investigation on Direct Reduction Followed by Magnetic Separation for Nb2O5-Bearing Ore

Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction

Fundamental Research on Selective Pre-enrichment of Low-Grade Niobium Concentrate from Bayan Obo Mine Via Super Gravity

Selective reduction of iron in high phosphorus oolite ores to production low phosphorus metal

Enrichment of Rare Earth and Niobium from a REE-Nb-Fe Associated Ore via Reductive Roasting Followed by Magnetic Separation

Thermodynamic Analysis and Experiment on the Conversion of Niobium Ferrite to Pyrochlore

Study on Separation of Niobium and Iron from Low Grade Niobium Ore

Behavior of niobium, manganese and phosphorus during reducing roasting of rare earth-rare metal ore of the Chuktukon deposit

Selective solid-phase reduction of iron in phosphorous oolite ores

Synchronous enrichment of phosphorus and iron from a high-phosphorus oolitic hematite ore to prepare Fe-P alloy by direct reduction-magnetic separation process