Abstract:This article presents an investigation into the effects of natural seawater and sea sand on the behaviour of unconfined and fibre-reinforced polymer-confined concrete. The experimental programme covered compression tests of a large number of standard concrete cylinders, which were prepared from the following four series of concrete: (1) the reference normal concrete, (2) sea-sand concrete, (3) seawater concrete (SwC), and (4) seawater sea-sand concrete. The concrete cylinders were either unconfined or confined with externally wrapped carbon fibre-reinforced polymer jackets to be tested at various ages from the early to the long term. This article presents the results of the first-phase tests, which covered a total of 48 specimens from the four series of concrete, with a half of them tested in the unconfined condition at the ages of 7 and 28 days, and another half tested with either one-ply or two-ply carbon fibre-reinforced polymer jackets at 28 days. The results show that at the ages of 7 and 28 days, the unconfined concrete specimens prepared with seawater and/or sea sand developed a slightly higher compressive strength, as compared to those prepared from normal concrete. When confined with carbon fibre-reinforced polymer jackets, the compressive stress–strain responses of concrete with or without seawater and/or sea sand were very similar. The use of seawater and sea sand did not seem to have significant effects on the compressive strength, ultimate axial strain and stress–strain responses of confined concrete, and the ultimate strain capacity of carbon fibre-reinforced polymer jackets neither. The test results were also compared with the predictions of an existing analysis-oriented stress–strain model for fibre-reinforced polymer-confined concrete. It is shown that the compressive strength, ultimate axial strain, stress–strain responses and dilation behaviour of the carbon fibre-reinforced polymer-confined concrete with or without seawater/sea sand can be reasonably well predicted.

The effects of seaweed powder to the properties of polymer modified concrete

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Study of the Effects of Fine Coral Powder and Salinity on the Mechanical Behaviour of Coral Sand-Seawater Cement Mortar

Experimental Investigations on the Properties of Epoxy-Resin-Bonded Cement Concrete Containing Sea Sand for Use in Unreinforced Concrete Applications

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Effect of Polymer Waste Mix Filler on Polymer Concrete Composites

Study on mechanical properties of dredged silt stabilized with cement and reinforced with alginate fibers

Utilization of By Product Kappaphycus alvarezii as Earthquake Resistant Material Lightweight Concrete

The Effect of Rice Husk Ash and Pineapple Leaf Fiber on Physical and Mechanical Properties of Concrete

Effect of Moringa Filler Powder in Eichhornia Crassipes Fibre-Reinforced Polymer Composites: Advancement in Mechanical Properties and Environmental Sustainability

Effects of oyster shell derivatives on performance enhancement of biomass-based 3D printed concrete

Composition, Technological, and Microstructural Aspects of Concrete Modified with Finely Ground Mussel Shell Powder

Physical and mechanical properties of polymer modified self-compacting concrete (SCC) using natural and recycled aggregates

Effect of wheat straw ash as cementitious material on the mechanical characteristics and embodied carbon of concrete reinforced with coir fiber

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Effect of Superfine Cement Modification on Properties of Coral Aggregate Concrete

The Effect of Superabsorbent Polymer and Nano-Silica on the Properties of Blended Cement

Investigation of Sugarcane Bagasse Ash (SBA)-Based Engineered Geopolymer Mortar Reinforced with Coconut Fibre for Engineered Geopolymer Composites

Effect of super water absorbing polymer based anti-washout admixtures on the properties of seawater-mixed cement paste

Sea/coral sand in marine engineered geopolymer composites: Engineering, mechanical, and microstructure properties

Mechanical, Barrier, Antioxidant and Antimicrobial Properties of Alginate Films: Effect of Seaweed Powder and Plasma-Activated Water