Abstract:Silicon is considered as a promising candidate of the anode material for the next generation lithium-ion batteries, due to its substantially higher gravimetric and volumetric capacity compared to conventionally used graphite. Electrolyte additives, fluoroethylene carbonate (FEC) and vinylene carbonate (VC) particularly, are usually applied for silicon-based lithium-ion batteries to tackle the problems such as poor capacity retention and low coulombic efficiency.1-3 In the present work, the decomposition mechanism of FEC as well as the surface modification of Si electrodes were investigated.4 It was observed that the FEC additive degrades at a higher reduction potential prior to the other carbonate solvents. A conformal solid electrolyte interphase (SEI), which consists of the decomposition products of FEC, is instantaneously formed on the silicon electrode as a result. This stable SEI layer sufficiently limits the emergence of cracks and suppresses the additional SEI formation from the decomposition of other electrolyte components. Both of these effects lead to a slower increase in polarization, thus a slower capacity fading, for the FEC containing cell. The differences in the SEI layer, formed with or without the presence of FEC, are schematically demonstrated in Fig 1. Besides, it was also observed that the LiPF6 decomposition can be influenced with the presence of FEC, and this was further studied with a combination of X-ray photoelectron spectroscopy (XPS) and solid-state nuclear magnetic resonance (NMR) techniques. We also demonstrated that by forming an effective SEI layer with the FEC and VC electrolyte additives, the silicon electrodes can be equally well functioning with a novel lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI)-based electrolyte as with the state-of-art LiPF6-based electrolyte.5 Figure 1

Utilizing Triethyl Phosphate to Increase the Solubility of Lithium Nitrate for Improved Silicon Anode Performance

Electrolytes Containing Triethyl Phosphate Solubilized Lithium Nitrate for Improved Silicon Anode Performance

Improved Performance of Silicon-Containing Anodes with Organic Solvent-Solubilized Lithium Nitrate

Improved SiGr/NCM523 Cycling via Triethyl Phosphate-Solubilized Lithium Nitrate Electrolyte

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Understanding the Effect of Lithium Nitrate as Additive in Carbonate-Based Electrolytes for Silicon Anodes

Rational Electrolyte Design for Interfacial Chemistry Modulation to Enable Long‐Term Cycling Si Anode

The Electrochemical Performance of Silicon Nanoparticles in Concentrated Electrolyte

A Steric-Hindrance-Induced Weakly Solvating Electrolyte Boosting the Cycling Performance of a Micrometer-Sized Silicon Anode

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Enhancing Li cycling coulombic efficiency while mitigating "shuttle effect" of Li−S battery through sustained release of LiNO 3

Building stable solid electrolyte interphases (SEI) for microsized silicon anode and 5V-class cathode with salt engineered nonflammable phosphate-based lithium-ion battery electrolyte

Enhanced Cycleability of Micron‐Size Silicon Anode by In Situ Polymerized Polymer Electrolyte

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Impact of Electrolyte on Direct-Contact Prelithiation of Silicon-Graphite Anodes in Lithium-Ion Cells with High-Nickel Cathodes

Constructing a conductive solid electrolyte interface by adding lithium nitrate into carbonate electrolyte for stable lithium metal anode

Tailoring chemical composition of solid electrolyte interphase by selective dissolution for long-life micron-sized silicon anode

Understanding the Roles of Electrolyte Additives on the Surface Modification Mechanism of Silicon-Based Anodes in Lithium-Ion Batteries

Trifluoropropylene Carbonate‐Driven Interface Regulation Enabling Greatly Enhanced Lithium Storage Durability of Silicon‐Based Anodes

Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate As an Effective Electrolyte Additive