Abstract:This study focuses on the development of new amino-functionalized magnetic Fe2O3/SiO2 nanocomposites with varying silicate shell ratios (1:0.5, 1:1, and 1:2) for the efficient elimination of Hg2+ ions found in solutions. The Fe2O3/SiO2–NH2 adsorbents were characterized for their structural, surface, and magnetic properties using various techniques, including Fourier transform infrared spectrum (FT-IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Braunauer–Emmett–Teller (BET), thermogravimetric analysis (TGA), zeta-potential, and particle size measurement. We investigated the adsorption circumstances, such as pH, dosage of the adsorbent, and duration of adsorption. The pH value that yielded the best results was determined to be 5.0. The Fe2O3/SiO2–NH2 adsorbent with a silicate ratio of (1:2) exhibited the largest amount of adsorption capacity of 152.03 mg g−1. This can be attributed to its significantly large specific surface area of 100.1 m2 g−1, which surpasses that of other adsorbents. The adsorbent with amino functionalization demonstrated a strong affinity for Hg2+ ions due to the chemical interactions between the metal ions and the amino groups on the surface. The analysis of adsorption kinetics demonstrated that the adsorption outcomes adhere to the pseudo-second-order kinetic model. The study of adsorption isotherms revealed that the adsorption followed the Langmuir model, indicating that the adsorption of Hg2+ ions with the adsorbent occurred as a monomolecular layer adsorption process. Furthermore, the thermodynamic analyses revealed that the adsorption of Hg2+ ions using the adsorbent was characterized by a spontaneous and endothermic process. Additionally, the adsorbent has the ability to selectively extract mercury ions from a complex mixture of ions. The Fe2O3/SiO2–NH2 nanocomposite, which is loaded with metal, can be easily recovered from a water solution due to its magnetic properties. Moreover, it can be regenerated effortlessly through acid treatment. This study highlights the potential use of amino-functionalized Fe2O3/SiO2 magnetic nanoparticles as a highly efficient, reusable adsorbent for the removal of mercury ions from contaminated wastewater.

Mechanisms of mercury ions separation by non-toxic organic liquid membrane via DFT, thermodynamics, kinetics and mass transfer model

Effective Removal of Mercury Ions in Aqueous Solutions: A Review

Modeling Of Elemental Mercury Control By Sorbents From Simulated Flue Gases

Online anion exchange column preconcentration and high performance liquid chromatographic separation with inductively coupled plasma mass spectrometry detection for mercury speciation analysis.

Efficient removal of mercury ions with MoS2-nanosheet-decorated PVDF composite adsorption membrane

Mercury Ion Responsive Wettability and Oil/Water Separation

Efficient capture and detoxification of mercury dichloride from wastewater by a PVDF/PEI adsorption membrane

Rapid Removal of Mercury from Water by Novel MOF/PP Hybrid Membrane

Removal of mercury ions from aqueous by functionalized LUS-1 with Bis [3-(triethoxysilyl) propyl] tetrasulfide as an effective nanocomposite using response surface methodology (RSM)

Achieving very low mercury levels in refinery wastewater by membrane filtration

Ultrasonic assisted magnetic solid phase extraction of ultra-trace mercury with ionic liquid functionalized materials

Magnetic solid-phase extraction for speciation of mercury based on thiol and thioether-functionalized magnetic covalent organic frameworks nanocomposite synthesized at room temperature

Highly Efficient and Selective Hg(II) Removal from Water by Thiol-Functionalized MOF-808: Kinetic and Mechanism Study

Mercury Ion Selective Adsorption from Aqueous Solution Using Amino-Functionalized Magnetic Fe2O3/SiO2 Nanocomposite

Optimization and Characterization of a New Environmentally Friendly Adsorbent to Remove Mercury Ions from Aqueous Solutions

Research on Low-level Hg(II) Removal from Water by the Heavy Metal Capturing Agent

A Facile Method to Prepare Dual-Functional Membrane for Efficient Oil Removal and in Situ Reversible Mercury Ions Adsorption from Wastewater

Bis-Schiff base cellulosic nanocrystals for Hg (II) removal from aqueous solution with high adsorptive capacity and sensitive fluorescent response

Laminated graphene oxide membrane for recovery of mercury-containing wastewater by pervaporation

Efficient mercury removal from flue gas using high-quality spinel mixed ferrites obtained from wastewater

Efficient mercury ion abatement through highly porous cellulose nanofibrils combined with microporous organic polymer enhancements