Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Inherent characteristics of the hygroscopicity of fiber and parenchyma of bamboo

Differences in the hygroscopic behavior of bamboo fiber and parenchyma

Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization

Water vapor sorption behavior of bamboo pertaining to its hierarchical structure

Hygroexpansion behaviors of bamboo in response to moisture absorption and desorption

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Changes in the Structural Composition and Moisture-Adsorption Properties of Mechanically Rolled Bamboo Fibers

Hygroscopicity, degradation and thermal stability of isolated bamboo fibers and parenchyma cells upon moderate heat treatment

Gradient variations of cellulose supramolecular structures in moso bamboo culm: from nano- to microhorizons

Influence of Textile Structure on the Hygroscopic Behavior of Bamboo Textile-Reinforced Polymer

Investigating the Moisture Sorption Behavior of Naturally and Artificially Aged Bamboo Paper with Multi-Analytical Techniques

Gradient Variation and Correlation Analysis of Physical and Mechanical Properties of Moso Bamboo (Phyllostachys edulis)

Three-dimensional structural characterization and mechanical properties of bamboo parenchyma tissue

Mechanical properties of the fiber cell wall in Bambusa pervariabilis bamboo and analyses of their influencing factors

Correlations between moisture expansion and flexural properties of bamboo strips in response to different loading rates

Experimental Investigations on the Mechanical Properties of Bamboo Fiber and Fibril

Isolation, Chemical Characterization, and Immunomodulatory Activity of Naturally Acetylated Hemicelluloses from Bamboo Shavings

A comparative study on the crystalline structure of cellulose isolated from bamboo fibers and parenchyma cells

Ultra-microstructure analysis and model development of bamboo fiber cell walls

The morphological characteristics and classification of vascular parenchyma cells in bamboo, Phyllostachys edulis (Carr.) J. Houz

Effects of pith ring on the hygroscopicity and dimensional stability of bamboo