Abstract:Currently, the demand for heat production by geothermal energy is increasingly strong amid the controversy surrounding non-renewable forms of energy. In France, the Dogger aquifer in the Paris Basin (DAPB) produces saline geothermal waters (GWs) that are hot (70–85 °C), anaerobic, and slightly acidic (pH 6.1–6.4), and are characterized mainly by the presence of Cl−, SO42−, CO2/HCO3−, and H2S/HS. These GWs are corrosive, while the well casings used are carbon steel. GWs have been continuously treated since the 1990s by corrosion inhibitors at the bottom of production wells to reduce water–steel interactions and scaling issues. Electrochemical experiments to optimize inhibitors were carried out on site, protected from the ambient atmosphere, with actual geothermal water, using water tapping at the wellhead. Currently, carbon steel corrosion/scaling, corrosion inhibition phenomenology, and kinetics evaluation remain important challenges. These issues are, of course, linked to the durability of installations. The novelty of our work consists of our validation of a modus operandi that properly reproduces, at the laboratory scale, operating conditions similar to those encountered on the types of geothermal installations. Particular attention was paid to characterizing waters and gases from 13 production wellheads that were modelled with PhreeqC® Version 3 hydrogeochemical software and the Thermoddem thermodynamic database for implementing standardized reconstituted geothermal water (SRGW), a well-balanced water representative of the major elements and dissolved gases of actual DAPB geothermal waters. The developed electrochemical setup enabled us to analyze corrosion mechanisms such as those observed on site and to investigate corrosion inhibition using petrosourced and biosourced inhibitors. The modus operandi constitutes a reference for further investigations, at the laboratory scale, of corrosion inhibition. These investigations may include screening and optimizing the formulas of petrosourced and biosourced inhibitors for use in DAPB waters.

Laboratory assessment of corrosion rate of carbon steel ground heat exchangers

An Experimental Investigation on the Relation between Corrosion and Thermohydraulic Behavior in Heat Exchangers for Geothermal Applications

Laboratory-Scale Implementation of Standardized Reconstituted Geothermal Water for Electrochemical Investigations of Carbon Steel Corrosion

High Temperature Corrosion Resistance of Different Commercial Alloys Under Various Corrosive Environments

Testing a model of flow and heat transfer for u-shaped geothermal exchangers

Application study on enamel heat exchange tube in GGH of coal-fired units with ultra-low flue gas emission

Recent advances in various nanomaterials utilized in geothermal heat exchangers

Corrosion resistance comparison of various carbon steel in inlet water of heat exchanger’s Kujang ammonia plant

Impact of operational temperature changes and freeze-thaw cycles on the hydraulic conductivity of borehole heat exchangers

Investigation of Scaling and Materials' Performance in Simulated Geothermal Brine

Design Framework and Laboratory Experiments for Helix and Slinky Type Ground Source Heat Exchangers for Retrofitting Projects

APPLICATION OF GEO-THERMAL RESPONSE TEST IN THE DESIGN OF GROUND HEAT EXCHANGER

Composites with Synergistically Enhanced Thermodynamic and Mechanical Properties for Geothermal Heat Exchangers

Evaluation of the Long-Term Performance of the Deep U-type Borehole Heat Exchanger on Different Geological Parameters Using the Taguchi Method

The Failure Mechanism of the 316 SS Heat Exchanger Tube in the Geothermal Water Environment

Importance of the Autoclave Testing Parameters on the Initial Stage of Corrosion under CO2-containing Geothermal Environments

A Case Study of Field Thermal Response Test and Laboratory Test Based on Distributed Optical Fiber Temperature Sensor

Corrosion Behavior in Volcanic Soils: In Search of Candidate Materials for Thermoelectric Devices

Heat Transfer Performance of Buried Extremely Long Ground-Coupled Heat Exchangers with Concentric Pipes

Investigation of the effects surface alteration via coatings on the condensation heat transfer and wettability

Study the Performance of Borehole Heat Exchanger Considering Layered Subsurface Based on Field Investigations