Abstract:Additive manufacturing (AM) of composition-sensitive NiTi shape memory alloys (SMAs) is hindered by uncontrollable non-equilibrium microstructures, leading to functional performance degradation and limitations in high-throughput net-shaping applications. To address these challenges, we propose a novel approach combining annular intra-laser directed energy deposition (AIL-DED) with a tailored gradient post-treatment process. This enables the fabrication of nanocomposite microstructures in NiTi SMAs with precise control over the homogenization of Ti 2 Ni nanoprecipitates. In-situ monitoring and characterization of thermal history, microstrain, and constitutional phases, were utilized to uncover the relationship between multi-scale structural features and mechanical responses. The interplay between laser reflectivity, energy input, and lattice thermal vibrations affects forming quality in AIL-DED. Dynamic temperature variations were studied before reaching thermal equilibrium, revealing insights into thermal and mechanical interactions during the process. These findings contribute to understanding challenges in fabricating high-quality NiTi SMAs. Examining phase transformation behavior and its correlation with processing parameters deepens understanding of microstructural evolution and provides insights for tailoring material properties. The stress relaxation and dislocation evacuation at elevated temperatures caused the expansion of lattice and interplanar spacing in the age-treated SMA's B2 matrix phase, exhibiting a stable two-step phase transformation behavior (B19′↔R↔B2). AIL-DED combined with two-stage heat treatment strategy demonstrated enhanced homogeneity of non-equilibrium microstructures, resulting in the formation of high-density, well-dispersed Ti 2 Ni nanoprecipitates, with a semi-coherent interface to B2 matrix. The combination of load-bearing strengthening through well-dispersed Ti 2 Ni nanoprecipitates and Orowan strengthening at the semi-coherent interface yielded simultaneous enhancements in nanohardness, ultimate compressive strength, compressive fracture strain, and deformation recovery, following the AIL-DED combined with two-stage heat treatment process. The fracture mechanism transitioned from a mixture of brittle-ductile behavior to predominantly ductile characteristics. This study provides valuable insights that advance additive manufacturing and enhance the functional performance of SMAs in critical applications.

Resultant physical properties of as-built nitinol processed at specific volumetric energy densities and correlation with in-situ melt pool temperatures

Investigating Melt Pool Dimensions in Laser Powder Bed Fusion of Nitinol: An Analytical Approach

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Bi-directional Scan Pattern Effects on Residual Stresses and Distortion in As-built Nitinol Parts: A Trend Analysis Simulation Study

Influence of Structural Porosity and Martensite Evolution on Mechanical Characteristics of Nitinol via In-Silico Finite Element Approach

Effect of Volume Energy Density on Selective Laser Melting Niti Shape Memory Alloys: Microstructural Evolution, Mechanical and Functional Properties

Mechanical Evaluation of Selective Laser Melted Ni-Rich NiTi: Compression, Tension, and Torsion

Laser powder bed fusion of nitinol shape memory alloy with superelastic characteristics on Ti substrate

Evolution of Transformation Behavior and Tensile Functional Properties with Process Parameters for Electron Beam Wire-Feed Additive Manufactured NiTi Shape Memory Alloys

Effect of microstructure on the superelasticity of high-relative-density Ni-rich NiTi alloys fabricated by laser powder bed fusion

Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance

Unleashing Multi-Scale Mechanical Enhancement in NiTi Shape Memory Alloy via Annular Intra-Laser Deposition with Homogenized Ti 2 Ni Nanoprecipitates

Measuring the tensile properties of Ti6Al4V fabricated by laser powder bed fusion: Influence of specimen dimensions

Correlation between microstructural inhomogeneity and architectural design in additively manufactured NiTi shape memory alloys

The effect of heat input on weld-bead geometry, mechanical, phase transformation temperature, and corrosion properties of autogenous double pulse TIG welded nitinol sheets

Comprehensive and Comparative Heat Treatment of Additively Manufactured Inconel 625 Alloy and Corresponding Microstructures and Mechanical Properties

Microstructure and phase transformation of nickel-titanium shape memory alloy fabricated by directed energy deposition with in-situ heat treatment

Mechanical Behavior Assessment of Ti-6Al-4V ELI Alloy Produced by Laser Powder Bed Fusion

Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication

Analysis of laser power/scan speed combinations on constant energy density: Correlation of roughness-density and structure-property of additively manufactured Ti-6Al-4 V alloy

Effects of printing volumetric energy densities and post-processing treatments on the microstructural properties, phase transformation temperatures and hardness of near-equiatomic NiTinol parts fabricated by a laser powder bed fusion technique