Abstract:The PAT@UiO‐66‐SO3H hybrid materials are constructed with high conductive UiO‐66‐SO3H and polydopamine‐coated natural clay attapulgite (PAT), it endows chitosan (CS) composite proton exchange membranes (PEMs) with generally improved performance. Metal–organic frameworks (MOFs) is now becoming the most fascinating conductive materials due to designable structure and pores at molecular level, and available crystal structure for the study of conduction mechanism. Nevertheless, comparing to the design of molecular structures of MOFs, the hybrid of MOFs with special micro/nano‐structured materials is considered to be a more effective approach for improved properties. In this study, the PAT@UiO‐66‐SO3H hybrid material was constructed with high conductive UiO‐66‐SO3H, a famous kind of MOFs, and polydopamine‐coated natural clay attapulgite (PAT), then the prepared hybrid material was blended with chitosan (CS) to prepare proton exchange membranes (PEMs). Owing to the special architectures and microenvironment, combining with the advantages of composition with UiO‐66‐SO3H and attapulgite, the prepared composite membranes showed considerable improved performances, including tensile strength, thermal and structural stability, fuel resistance ability, conduction and single cell performances. The CS/PAT@UiO‐66‐SO3H‐5 composite membrane exhibited the highly enhanced tensile strength of 67 MPa and improved thermal stability with Tg value of 235°C, as well as the lowest methanol crossover value of 1.2 × 10−6 cm2 s−1. Besides, the highest proton conductivity of 38.8 mS cm−1 at 80°C and power density of 37.9 mWcm−2 was achieved with CS/PAT@UiO‐66‐SO3H‐3 composite membrane, these performances were higher than pristine CS of 22.7 mS cm−1 and 32.2 mW cm−2 respectively. Our investigation reveals great application potential of MOFs based hybrid materials in fabricating of high performance composite PEMs. Highlights PAT@UiO‐66‐SO3H hybrid materials were constructed from MOFs and natural clay. The hybrid materials possessed special architectures and microenvironment. The PAT@UiO‐66‐SO3H introduced consecutive channels and proton sites. The hybrid membranes achieved excellent performances.

Characteristics and performance studies of a composite polymer electrolyte membrane based on chitosan/glycerol–sulfosuccinic acid modified montmorillonite clay

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Preparation and Properties of Chitosan/acidified Attapulgite Composite Proton Exchange Membranes for Fuel Cell Applications

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Investigation on sulfonated PVC/polymethyl methacrylate (PMMA)/polystyrene sulfonate (PSS) polymer blends as proton-conducting membrane

Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Optimizing Sodium Alginate/PVA Polymer Electrolyte Membrane with Montmorillonite for Enhanced Architectural Features and Performance in DMFC Application

Rational tailoring of architectures and microenvironment on MOFs/natural clay hybrid materials for efficiently boosted performance of hybrid proton exchange membranes

Novel chitosan-ionic liquid immobilized membranes for PEM fuel cells operating above the boiling point of water

Hybrid Composite Membrane of Phosphorylated Chitosan/Poly (Vinyl Alcohol)/Silica as a Proton Exchange Membrane

Sulfonated Poly(ether Ether Ketone)/clay-So3h Hybrid Proton Exchange Membranes for Direct Methanol Fuel Cells

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

Synthesis of Composite Membrane Based Biopolymer Chitosan With Silica From Rice Husk Ash For Direct Methanol Fuel Cell Application

Preparation and Characterization of Red Mud Modified Chitosan-PVA Composite Membrane for Direct Methanol Fuel Cell