Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Study on Preparation and Performance of Reactive Polyurethane Hot Melt Adhesives Based on a Polycarbonate Diol and a Polyester Diol

Reactive polyurethane hot melt adhesives based on polycarbonate and sebacic acid-based polyester polyols

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Synthesis and properties of reactive polyurethane hot melt adhesive based on a novel phosphorus-nitrogen-containing polyol

Effect of soft segment structure on properties of polyurethane elastomers

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

Facile synthesis of polyester-polyether block copolyols for the sustainable high-performance polyurethane reactive hot melt adhesives

Synthesis and properties of flame-retardant reactive hot melt polyurethane adhesive

CO2-based Poly (propylene Carbonate) with Various Carbonate Linkage Content for Reactive Hot-Melt Polyurethane Adhesives

PPC-based reactive hot melt polyurethane adhesive (RHMPA)—Efficient glues for multiple types of substrates

Reactive hot melt polyurethane adhesives modified with pentaerythritol diacrylate: synthesis and properties

Role of the Soft and Hard Segments Structure in Modifying the Performance of Acrylic Adhesives Modified by Polyurethane Macromonomers

Synthesis, characterization and properties of biomass and carbon dioxide derived polyurethane reactive hot-melt adhesives

Thermoplastic polyurethane-based polycarbonate diol hot melt adhesives: The effect of hard-soft segment ratio on adhesion properties

Rational Design of Waterborne Polyurethane Pressure Sensitive Adhesives for Different Working Temperatures

Influence of the hard segments content on the structure, viscoelastic and adhesion properties of thermoplastic polyurethane pressure sensitive adhesives

Synthesis of Polyurethane Acrylate and Application to Ultraviolet-Curable Pressure-Sensitive Adhesive

Synthesis of polyurethane acrylate and application to UV-curable pressure-sensitive adhesive

Enhanced polyurethanes based on different polycarbonatediols

Copolymerization approach of soft segment towards the adhesion improvement of polycarbonate-based thermoplastic polyurethane