Abstract:Recently, iron powder has been proposed as a high energy density, easily storable, and CO2-free energy carrier. During the iron combustion, thermal energy is released as heat. The combusted products, the iron oxide particles, are captured and cyclically reduced back into iron powder in a process that is powered by renewable energy. Each combustion step, followed by a reduction, constitutes one cycle in the process. Previous studies predominantly focused on the reduction and combustion as individual steps. This work investigates the impact of cyclic combustion-reduction on material properties, with the specific focus on the reduction of iron oxides using hydrogen under fluidisation conditions. The powder is combusted and reduced for 3 cycles under the same conditions. Afterwards the properties of the powder and the reaction conversion are characterized. The physical techniques used for size and shape analysis include laser diffraction particle size analysis and scanning electron microscopy (SEM). For structure and chemistry, X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis are also employed. To study the effect of the reduction conditions on the cycle and on the material properties of the powder, different experiments are conducted using 550 and 575°C as reduction temperatures. The higher conversion is observed at 575°C . During the first combustion particles resulted in large agglomerates and required a manual grinding step before being sent to the next reduction. However, the particle size distribution remains relatively stable in all subsequent cycles. The results suggest that the powder can be effectively utilized in the iron fuel cycle without requiring additional intermediate treatments, such as grinding and sieving after each cycle. This aspect highlights the potential feasibility and simplicity of implementing the cyclic combustion-reduction process for practical applications of iron powder as an energy carrier.

Scale-up of the Solution Combustion Synthesis of Iron Oxides with the Addition of the Inactive Component FeOx

Ultra-Large-Scale Synthesis of Fe3o4 Nanoparticles and Their Application for Direct Coal Liquefaction

Conversion of ferrous compounds in a flameless combustion wave of hexogen-based systems filled with iron formate and other additives

Combustion synthesis and characterization of NiCuZn ferrite powders

New Sustainable, Scalable and One-Step Synthesis of Iron Oxide Nanoparticles by Ion Exchange Process

Combustion synthesis of zinc ferrite powders

Combustion synthesis of zinc ferrite powders in oxygen

Solution Combustion Synthesis of Copper Nanopowders: The Fuel Effect

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Process Optimization and Preparation of Ferric Oxide Nanoparticles by Homogeneous Precipitation Method

Novel Preparation and Physicochemical Characterization of a Nanocrystalline Cobalt Ferrite System

Synthesis of nanocrystilline ferrites by sol–gel combustion process: the influence of pH value of solution

Effect of the Nature and Concentration of the Fuel on the Structure and Morphology of ZnO Microspheres Produced via Spray Solution Combustion Synthesis

Catalytic Properties of Nanoscale Iron-Doped Zirconia Solid-Solution Aerogels

Synthesis of Oxynitride Composites during Combustion of a Ferrosilicon–Natural Mineral–Aluminum Mixture in Nitrogen

Cyclic reduction of combusted iron powder: A study on the material properties and conversion reaction in the iron fuel cycle

Scalable Synthesis of MIL-88A(Fe) for Efficient Aerobic Oxidation of Cyclohexene to 2-Cyclohexene-1-ol

Unravelling the role of particle size and nanostructuring on the oxygen evolution activity of Fe-doped NiO

Synthesis of ultrofine LiCoO2 by citrate-nitrate gel combustion process

Enhanced Electrocatalytic Urea Synthesis over Iron-Doped InOOH Nanosheets under Ambient Conditions

Aerosol synthesis of phase-controlled iron-graphene nanohybrids through FeOOH nanorod intermediates.