Abstract:Recently, piezo-catalytic technology with low cost, simplicity and feasibility are drawing more attention in the field of water pollution remediation; nevertheless, the catalytic activity of diverse piezoelectric materials is limited by the rapid recombination of electron-hole pairs and low carrier mobility. Herein, a collaborative strategy of entropy and defect engineerings is proposed to enhance the piezo-catalytic activity of BaTiO 3 -based materials ((1- x )BaTiO 3 - x Sm(Ca 0.2 Zn 0.2 Zr 0.2 Sn 0.2 Hf 0.2 )O 3 ). As x increases, the configuration entropy of the materials is greatly increased from 0 R to 1.3227 R, suggesting that the ceramics with x = 0.05, 0.10, 0.15 and 0.20 possess significantly increased disordering and the ferroelectric long-range order is broken, rendering the materials rich in catalytically active sites and thus enhancing the catalytic performance. In addition, the doping of multiple ions with different ionic radii and valence states leads to abundant oxygen vacancies inside the material, thereby enabling easier separation and migration of electron-hole pairs and resulting in enhanced catalytic activity. Accordingly, the high-configuration-entropy 0.90BaTiO 3 -0.10Sm(Ca 0.2 Zn 0.2 Zr 0.2 Sn 0.2 Hf 0.2 )O 3 material with abundant oxygen vacancies exhibits outstanding piezo-catalytic activity, giving the reaction rate constant k of 38.7 × 10 −3 min −1 for rhodamine B (RhB). Simultaneously, the 0.90BaTiO 3 -0.10Sm(Ca 0.2 Zn 0.2 Zr 0.2 Sn 0.2 Hf 0.2 )O 3 material also show favorable catalytic activity for methylene blue (MB) and methyl orange (MO) with reaction rate constants k of 31.8 × 10 −3 min −1 and 19.4 × 10 −3 min −1 , respectively. This work proposes a novel strategy for enhancing the piezo-catalytic activities of BaTiO 3 -based piezoelectric materials by the co-engineering of high-entropy doping and defect.

Effect of Poling on Multicatalytic Performance of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Sr0.3)TiO3 Ferroelectric Ceramic for Dye Degradation

Pyroelectric Pb(Zr0.52Ti0.48)O3 polarized ceramic with strong pyro-driven catalysis for dye wastewater decomposition

Preparation and Piezoelectric Catalytic Performance of HT-Bi2MoO6 Microspheres for Dye Degradation

Effect of surface/bulk polarization on piezocatalysis using BaTiO3

Diffused phase transition boosted dye degradation with Ba (ZrxTi1−x)O3 solid solutions through piezoelectric effect

Enhancement of piezoelectric catalysis of Na0.5Bi0.5TiO3 with electric poling for dye decomposition

Enhanced tribocatalytic degradation of dye pollutants through governing the charge accumulations on the surface of ferroelectric barium zirconium titanate particles

Enhancement of pyroelectric catalysis of ferroelectric BaTiO3 crystal: The action mechanism of electric poling

Dual boosting of the built-in polarization field in the BiFeO3/ZnS heterostructure for water purification: Effects of Z-scheme heterostructure and corona poling

Efficient enhancement of piezo-catalytic activity of BaTiO 3 -based piezoelectric ceramics via phase boundary engineering

Improving Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o< Sub>3 Ceramics Via Tailoring Dy-doping Amount and Ceramic Processing

Degradation of dye through mechano-catalysis using BaBi4Ti4O15 catalyst

A coupled photo-piezo-catalytic effect in a BST-PDMS porous foam for enhanced dye wastewater degradation

Hydrogen Generation and Degradation of Organic Dyes by New Piezocatalytic 0.7Bifeo3-0.3Batio3 Nanoparticles with Proper Band Alignment

High-entropy doping and defect co-engineering to synergistically boost piezo-catalytic activity of BaTiO 3 -based materials

Poling‐induced enhancement of piezocatalytic performance of 0.96K0.5Na0.5NbO3‐0.04Bi0.5Na0.5ZrO3 ceramic blocks

Sm-Doped (1 – x )Pb(Mg 1/3 Nb 2/3 )O 3 - x PbTiO 3 Nanostructures for Piezocatalytic Dye Degradation

Ferroelectric-semiconductor BaTiO3-Ag2O nanohybrid as an efficient piezo-photocatalytic material

Insights into the tribo-/pyro-catalysis using Sr-doped BaTiO3 ferroelectric nanocrystals for efficient water remediation

A comprehensive analysis of the structural, microstructural, optical, and piezocatalytic activity of Ba0.92Ca0.08Zr0.09Ti0.91O3 and Ba0.98Ca0.02Zr0.07Ti0.93O3 lead-free ceramics

Significant Enhancement of Piezoelectric Photocatalytic Activity in Mn-doped BiFeO3