Abstract:Ion transport is a critical factor influencing the performance of electrochromic devices (ECDs). In this work, the effects of the valence state and ionic radius of six cations, Li+, Na+, K+, Mg2+, Zn2+, and Al3+, on the performance of poly(3,4-ethylenedioxythiophene)-polystyrene sulfonic acid (PEDOT:PSS)-based ECDs are investigated. Both ion migration and diffusion are discussed as processes that were analyzed, with results indicating that the primary contributor to the response of ECDs is ion migration. The response time decreases with increasing ionic valence and ionic radius, with the valence state having the predominant effect on response speed. Multivalent ions, due to strong electric field forces, migrate more rapidly and intercalate fewer ions at equivalent reaction charges, thereby facilitating a faster response. ECDs with larger-radius ions, which exhibit slower diffusion rates, also achieve faster response speeds. Among the tested ECDs with various electrolytes, the Al3+-based ECD demonstrates the fastest colored/bleached response time of 0.36/0.4 s. In addition, ions with larger radii introduce greater steric hindrance and structural damage during insertion and extraction, leading to ion retention issues and reduced cycling stability. After 500 cycles (2025 s) under a square wave voltage of ±1.5 V, the peak current of ECDs with Li+ (0.60 Å) electrolyte decreased by only 5.07/5.66%, whereas for K+ (1.33 Å) electrolyte, the decrease was 11.55/12.37%. ECDs utilizing small-radius, higher-valence ions, such as Al3+, achieved both fast response and high cycling stability, with peak current reductions of only 6.98/5.01%. Additionally, the charge storage dynamics were examined by analyzing the contributions from surface-controlled and diffusion-controlled charges, further confirming that ion migration dominates in ECDs. The high contribution of surface-controlled charges (80%) supports the fast response of ECDs and contributes to the high coloration efficiency (592.6 cm2/C for Al3+-based devices).

A Transparent to Dark Non‐Complementary Electrochromic Device Based on Al3+ Guest Ions with TMTU/TMFDS2+ Redox Couple for Robust Stability

High-performance of Quasi-Solid-state Complementary Electrochromic Devices Based on Al3+/Li+ Dual-Ion Electrolyte

Synergistic Effect of Al3+/Li+-Based All-Solid-State Electrochromic Devices with Robust Performance

All-solid-state electrochromic devices based on the LiAlSiO4 electrolyte

Long-Term Stable Complementary Electrochromic Device Based on WO3 Working Electrode and NiO-Pt Counter Electrode

MgF2 as abundant and environmentally friendly electrolytes for high performance electrochromic devices

Effect of independently controllable electrolyte ion content on the performance of all-solid-state electrochromic devices

High-performance Complementary Electrochromic Device Based on Surface-Confined Tungsten Oxide and Solution-Phase N -Methyl-phenothiazine with Full Spectrum Absorption

Highly Contrasted and Stable Electrochromic Device Based on Well-Matched Viologen and Triphenylamine

All-thin-film inorganic complementary electrochromic devices with the novel self-aligned lithium-rich ion conductor

Transparent-to-black Electrochromic Smart Windows Based on N, N, N′, N′-Tetraphenylbenzidine Derivatives and Tungsten Trioxide with High Adjustment Ability for Visible and Near-Infrared Light

Robust non-complementary electrochromic device based on WO<sub>3</sub> film and CoS catalytic counter electrode with TMTU/TMFDS<SUP>2+</SUP> redox couple

Electrochromic windows and flexible devices based on viologen-containing hydrogel electrolytes

Effects of Ion Valence States and Radii on the Performance of Solid-State PEDOT:PSS Electrochromic Devices

Electrochromic Device Based on Adsorbable Viologens

Electrochromic Windows with Fast Response and Wide Dynamic Range for Visible-Light Modulation Without Traditional Electrodes.

Colorless-to-black electrochromic devices based on ambipolar electrochromic system consisting of cross-linked poly(4-vinyltriphenylamine) and tungsten trioxide with high optical contrast in visible and near-infrared regions

Proton and Redox Couple Synergized Strategy for Aqueous Low Voltage-Driven WO3 Electrochromic Devices

An all-solid-state polymeric electrochromic device based on two well-matched electrodes with fast switching time and excellent cycling stability

Low-power, fast response simplified electrochromic device based on functionalized gel electrolyte

CaF2: A novel electrolyte for all solid-state electrochromic devices