Abstract:Abstract Background Although microbial fuel cells (MFCs) represent a promising technology for capturing renewable energy from wastewater, their scaling-up is significantly limited by a slow-rate cathodic oxygen reduction reaction (ORR) and the development of a resilient anodic microbial community. In this study, mixed transition metal oxides of nickel and copper (Ni and Cu), supported on a graphene (G) (NiO–CuO/G) electrocatalyst, were synthesized and tested as a cost-effective cathode for ORR in MFCs. Electrochemical measurements of electrocatalyst were conducted using a rotating disk electrode (RDE) and linear sweep voltammetry (LSV) in a neutral electrolyte, and compared with a benchmark Pt/C catalyst. Furthermore, the long-term performance of the as-synthesized electrocatalyst was evaluated in a single-chamber MFC by measuring organic matter removal and polarization behavior. The successful enrichment of electroactive biofilm was also monitored using transmission electron microscopy and the Vitek2 compact system technique. Results When compared with the benchmark platinum cathode, the NiO–CuO/G electrocatalyst exhibited high selectivity toward ORR. The rotating disk electrode (RDE) experiments reveal that ORR proceeds via a 4-electron ORR mechanism. Furthermore, the NiO–CuO/G electrocatalyst also exhibited a high power density of 21.25 mW m −2 in an air-cathode MFC, which was slightly lower than that of Pt/C-based MFC (i.e., 50.4 mW m −2 ). Biochemical characterization of the most abundant bacteria on anodic biofilms identified four genera (i.e., Escherichia coli , Shewanella putrefaciens , Bacillus cereus , and Bacillus Thuringiensis/mycoides ) that belonged to Gammaproteobacteria , and Firmicutes phyla. Conclusions This study demonstrates that the NiO–CuO/G cathode had an enhanced electrocatalytic activity toward ORR in a pH-neutral solution. This novel mixed transition metal oxide electrocatalyst could replace expensive Pt-based catalysts for MFC applications.

Scalability of biomass-derived graphene derivative materials as viable anode electrode for a commercialized microbial fuel cell: A systematic review

A review on graphene / graphene oxide supported electrodes for microbial fuel cell applications: Challenges and prospects

Sustainable microbial fuel cell functionalized with a bio-waste: A feasible route to formaldehyde bioremediation along with bioelectricity generation

Graphene-based Electrode Materials for Microbial Fuel Cells

Performance evaluation of microbial fuel cell fabricated using green nano-graphene oxide as coating anode material

Optimizing microbial fuel cells performance: An innovative approach integrating anode materials, dual-pollutant treatment, and long-term operation

Performance of microbial fuel cell with graphene doped bioanode

Assessment of biomass material as valuable electrode for high energy performance in microbial fuel cell with biodegradation of organic pollutant

Enhancing microbial fuel cell performance: anode modification with reduced graphene oxide and iron(III) for improved electricity generation

Electrode Material as Anode for Improving the Electrochemical Performance of Microbial Fuel Cells

Recent advancements on the development of microbial fuel cells: Anode modification and scale-up challenges in upgrading anode electrode

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Novel coumarin- and quinolinone-based polycycles as cell division cycle 25-A and -C phosphatases inhibitors induce proliferation arrest and apoptosis in cancer cells.

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

A graphene/poly(3,4-ethylenedioxythiophene) hybrid as an anode for high-performance microbial fuel cells

The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst

Nitrogen-doped graphene oxide with enhanced bioelectricity generation from microbial fuel cells for marine sewage treatment

The Performance of a Modified Anode Using a Combination of Kaolin and Graphite Nanoparticles in Microbial Fuel Cells

Modification of the anodes using MoS2 nanoflowers for improving microbial fuel cells performance

Graphene/Fe 3 O 4 Nanocomposites as Efficient Anodes to Boost the Lifetime and Current Output of Microbial Fuel Cells.