Abstract:Investigating the effect of steel fiber blending schemes on the dynamic mechanical properties and damage evolution of concrete is crucial for deep-shaft construction projects. Dynamic impact tests were conducted on steel fiber concrete specimens with varying mixing schemes and grades, according to the settings of the ultra-deep shaft-lining support project of a mine in Yunnan Province. The evolution of strain fields on the specimen surfaces under impact loads was analyzed using digital image correlation techniques. The steel fiber mixing schemes were as follows: single mixing, in which 55 kg of end-hook long fibers were added per cubic meter of concrete; double mixing, which involved the addition of 15 kg of end-hook long fibers and 40 kg of short copper-plated straight fibers per cubic meter of concrete; and triple mixing, which involved the addition of 40 kg of end-hook long fibers, 5 kg of copper-plated straight medium-length fibers, and 10 kg of short copper-plated straight fibers per cubic meter of concrete. The test results indicated that the dynamic compressive strength and dissipated energy ratio of the triple-mixed steel fiber concrete specimens were greater than those of the single- and double-mixed steel fiber concrete specimens. The smaller dynamic strength of plain concrete, the more pronounced the enhancement in the dynamic strength observed in concrete specimens with a steel fiber admixture. A high-speed camera was used to record the complete failure process of the steel fiber concrete specimens. The camera revealed that the failure mode was influenced by the concrete grade and steel fiber mixing scheme. The observed failure modes included shear, splitting, and shear-splitting failures. Compared with plain concrete specimens, steel fiber concrete specimens exhibited fewer cracks, a lower percentage of reflected energy, and higher percentages of transmitted and dissipated energy under impact loading. This indicates that the steel fibers effectively inhibited crack initiation and propagation, thereby enhancing the stability of the shaft wall concrete. Non-destructive impact tests on steel fiber concrete specimens showed that the triple-mixed steel fiber scheme inhibited concrete damage under impact loading to the maximum extent. It is recommended that the lining support for the deep shaft of the mine be constructed using grade C50 concrete with steel fibers mixed with 40 kg of end-hooked long fibers, 5 kg of copper-plated straight medium-length fibers, and 10 kg of short copper-plated straight fibers per cubic meter of concrete.

Mechanical Characteristics of Hybrid-Fiber-Reinforced Concrete Shaft Wall Structure Under Uneven Load

Hybrid-Fiber-Reinforced Concrete Used in Frozen Shaft Lining Structure in Coal Mines

Field Monitoring and Numerical Simulation Analysis of Deep Shaft Concrete Wall Support

Experimental and Numerical Studies on the Mechanical Performance of a Wall-beam-strut Joint with Mechanical Couplers for Prefabricated Underground Construction

Experimental Study on Mechanical Properties of Polypropylene: Steel Fiber Concrete and Loading Characteristics of Shaft Lining

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Three-Dimensional Physical Similarity Simulation Experiments for a Transparent Shaft Coal Pocket Wall in Coal Mines.

A Study on the Mechanical Behavior of Precast Concrete Shear Wall Structure with Hybrid Connection of Section Steel

Experimental Study on Dynamic Mechanical Properties and Damage Law of Steel Fiber Concrete

Seismic performance of new precast concrete shear wall under high axial compression ratio

STUDY ON THE BEHAVIORS OF PRESTRESSED PRECAST HYBRID SHORT-SHEAR WALLS

Experimental and numerical study on the model of hybrid fiber phase change concrete frozen shaft wall

Experimental and Numerical Investigation on Seismic Performance of a Hybrid RC Frame System with Stiffened Masonry Wall

Experimental Study on the Seismic Behavior of Concrete Composite Bearing Walls

Experimental Study on Damage Breakage Properties of Shaft Lining Concrete under Hydromechanical Coupling

Experimental and numerical investigation on failure behavior of ring joints in precast concrete shear walls

Study on Failure Mode of Unbonded Post-tensioned Precast Short-pier Wall

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

Mechanical property test and numerical analysis of a novel precast shear wall

Study on Seismic Performance of Precast Shear Wall Structure Connected by Sleeve and Threaded Rod Connectors

Research on the Mechanical Characteristics and Calculation Method of Concrete Cavity Shear Wall