Abstract:Despite great contributions having been made on the topic of numerical modeling methods for cross-laminated timber (CLT) shear walls under lateral loads, it is still challenging to simulate the nonlinear wall behavior with both computational efficiency and modeling accuracy. In this paper, a series of novel modeling strategies are developed, aiming to provide a potential solution to this challenge. The modeling strategies involve the revised version of a uniaxial hysteretic model for dowel-type timber joints, physical and phenomenological modeling methods for typical CLT connections (i.e., hold-down and angle bracket connections), and a fiber-section-based modeling method for CLT shear walls. The modeling strategies were validated by existing experimental data, and the modeling results showed that the proposed fiber-section-based model is capable of simulating the lateral performance of both platform-type and balloon-type CLT shear walls with sufficient accuracy while maintaining desirable computational efficiency. The fiber-section-based model was then used to conduct parametric studies, investigating the influence of construction methods, wall aspect ratios, connection stiffness, and vertical load magnitudes on the lateral performance of CLT shear walls. The studies showed that the initial stiffness and ductility ratio of balloon-type CLT shear walls were 39.1–47.1% and 13.7–19.4% larger than the platform-type ones, while the ultimate capacity was less affected by construction methods. Slenderer CLT shear walls had lower ultimate capacities and initial stiffnesses, as well as smaller ductility ratios. Stiffer hold-down connections contributed to larger initial stiffness but resulted in the CLT shear wall failing in a less ductile manner. The vertical load had positive impacts on the ultimate capacity, initial stiffness, and ductility ratio of CLT shear walls, although the effect on the ultimate capacity was quite limited.

Seismic Performance and Collapse Fragility of Balloon-Framed CLT School Building

Seismic performance evaluation of self-centering balloon-framed CLT building

Seismic performance evaluation of innovative balloon type CLT rocking shear walls

Seismic loss and resilience assessment of tall-coupled cross-laminated timber wall building

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Seismic Performance Assessment of Post-Tensioned CLT Shear Wall Buildings with Buckling-Restrained Axial Fuses

Seismic Behavior of Buckling Restrained Braced Composite Frames

Analytical Study On Buckling Restrained Braced Composite Frames

Collapse tests of RC frame with sudden middle column removal

Theoretical Building Height Limits of Balloon Mass Timber Shear Wall Systems

Vibration-based monitoring of a cross-laminated timber building in a high seismicity zone

Performance and Risk to Light-Framed Wood Residential Buildings Subjected to Tornadoes

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Numerical modeling strategies and parametric analyses of platform-type and balloon-type cross-laminated timber (CLT) shear walls under lateral loads

Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology

Probabilistic seismic performance evaluation of composite frames with concrete-filled steel tube columns and buckling-restrained braces

Structural Performance of CLT Shear Walls with Hyperelastic Hold Downs

Displacement-Based Design of Hybrid RC–Timber Structure: Seismic Risk Assessment

Experimental and Numerical Analysis of Residual Load-Carrying Capacity of Cross-Laminated Timber Walls after Fire

The behavior of cross-laminated timber and reinforced concrete floors in a multi-story building

Finite element modelling of the progressive collapse of post-and-beam mass timber building substructures under edge and corner column removal scenarios