Abstract:Cross-laminated timber (CLT) is a new generation of engineered wood product developed initially in Europe and has been used in North America for various applications. CLT is composed of at least three layers of lumber boards stacked crosswise in orthogonally alternating orientation to the adjacent layers. CLT has been gaining popularity and increasing application areas in the construction industry, such as building systems, mats for construction and temporary road applications as well as temporary bridges. It is especially identified as the prevailing material in modular construction for the future building industry. However, CLT as a relatively new structural material has limited studies related to their durability and long-term performance. Moreover, nondestructive evaluation methods to understand their mechanical behavior after exposure to harsh environment are lacking. This paper contributes to the development of a rapid nondestructive evaluation method to assess the mechanical properties using transverse vibration method and ultrasonic testing. The free vibration response triggered by the impulse excitation is captured using contact accelerometer and non-contact laser Doppler vibrometer (LDV). The LDV measurement is proven to respond similar to conventional accelerometers but more convenient as a rapid assessment method. While the longitudinal wave speed is measured by ultrasonic testing (UT) in a through-transmission mode, the modulus of elasticity was calculated in terms of measured wave speed. By investigating the different structural states and dimensions of CLT samples, the laboratory and the manufacturing facility, the influences of aging on effective dynamic modulus of elasticity (MOE) and damping are shown. The numerical and experimental results indicate the increase in moisture content decreases the fundamental frequency. Therefore, moisture content should be measured in order to examine the coupled effects of moisture content and aging on the fundamental frequency. The damping ratio extracted using half-power bandwidth method is shown as an additional information related to the moisture content. The non-contact transverse vibration method and UT are shown as an efficient nondestructive evaluation method for assessing the CLT structural state right after the manufacturing as a quality assurance method or after their service in field as a diagnostic tool.

Vibration-based monitoring of a cross-laminated timber building in a high seismicity zone

Nondestructive assessment of cross-laminated timber using non-contact transverse vibration and ultrasonic testing

Seismic loss and resilience assessment of tall-coupled cross-laminated timber wall building

Evaluation of vibration properties of an 18-story mass timber–concrete hybrid building by on-site vibration tests

Cross laminated timber geometry and joinery implications on low-frequency sound transmission: FEA and Laser Doppler Vibrometry studies

Initial monitoring of a six-story lightweight timber frame building under different environmental conditions

Modal testing and finite element model updating of full-scale hybrid timber-concrete building

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Cross‐laminated timber for seismic retrofitting of RC buildings: Substructured pseudodynamic tests on a full‐scale prototype

Seismic performance evaluation of innovative balloon type CLT rocking shear walls

Vibration serviceability of hybrid CLT-steel composite floors based on experimental and numerical investigations using random walk models

Seismic behavior of innovative hybrid CLT-steel shear wall for mid-rise buildings

Cross-laminated timber (CLT) floor serviceability under multi-person loading: Impact of beam–panel connections

Seismic Performance Assessment of Post-Tensioned CLT Shear Wall Buildings with Buckling-Restrained Axial Fuses

Seismic performance evaluation of self-centering balloon-framed CLT building

Higher-order modal parameter estimation and verification of cross-laminated timber plates for structural-acoustic analyses

Vibration serviceability performance of prefabricated cross-laminated timber steel rib composite floors

Novel FRF-based fast modal testing of multi-storey CLT building in operation using wirelessly synchronised data loggers

Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology

The behavior of cross-laminated timber and reinforced concrete floors in a multi-story building

Structural Analysis and Design of Sustainable Cross-Laminated Timber Foundation Walls