Abstract:This paper conceptualizes a novel passive vibration control system comprising a tuned mass damper-inerter (TMDI) contained within a seismically isolated rooftop and investigates numerically its effectiveness for seismic response mitigation of building structures. The working principle of the proposed isolated rooftop tuned mass damper-inerter (IR-TMDI) system relies on the yielding of typical elastomeric isolators (e.g. lead rubber bearings) under severe earthquake ground motions to create a flexible rooftop which, in turn, increases the efficacy of the TMDI for seismic vibrations suppression. Herein, a nonlinear mechanical model is considered to explore the potential of IR-TMDI whereby the primary building structure is taken as linear damped single-mode system, while the Bouc–Wen model is used to capture the nonlinear/hysteretic behaviour of the rooftop isolators. An equivalent linear system (ELS), derived through statistical linearization, is used to expedite the optimal IR-TMDI tuning for different isolated rooftop properties, inertance, and primary structure natural period. To this aim, white noise excitations with different intensities as well as Kanai–Tajimi excitations for different soil conditions are considered. It is found that tuning for maximizing TMDI seismic energy dissipation is more advantageous than tuning for minimizing primary structure displacement or acceleration response since it lowers deflection and force demands to the isolators and to the inerter. Further, significant primary structure displacement and acceleration reductions are achieved as the effective rooftop flexibility increases through reduction of the nominal strength of the isolators, which verifies the intended working principle of the IR-TMDI. This is also confirmed through response history analyses to the nonlinear model under benchmark recorded ground motions. Moreover, for IR-TMDI with sufficiently flexible isolators, improved seismic structural performance with concurrent reduced deflection and force demands at the isolators is shown for all considered stochastic excitations as the inertance scales-up, which is readily achievable technologically. Thus, it is concluded that the IR-TMDI mitigates effectively structural seismic response without requiring the inerter to span several floors, as suggested in previous studies, thus extending the TMDI applicability to both existing and low-rise new-built structures.

Feasibility Study of Actively-Controlled Tuned Inertial Mass Electromagnetic Transducers for Seismic Protection

An inerter-based electromagnetic damper for civil structures: Modeling, testing, and seismic performance

Development of a semi-active MR inerter for seismic protection of civil structures

A novel nonlinear isolated rooftop tuned mass damper-inerter (IR-TMDI) system for seismic response mitigation of buildings

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

Semi-active vibration control for structural systems with a variable inertia mass damper

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Control effect of large tuned mass damper used for seismic retrofitting of existing high‐rise building

Optimum tuning of Tuned Mass Dampers for frame structures under earthquake excitation

Study on semi‐active tuned mass damper with variable damping and stiffness under seismic excitations

Structural vibration mitigation via an inertial amplification mechanism based absorber

Development of Active Vibration Damping Device Adjusting TMD to Various Periodic Bands of Seismic Waves

Seismic response control of tall building using semi-active tuned mass damper considering soil-structure interaction

An innovative methodology for hybrid vibration control (MR+TMD) of buildings under seismic excitations

Application of Semi-active TMD to Tilted High-Rise Building Structure Subjected to Seismic Loads

Optimum design and performance evaluation of the tuned inerter-negative-stiffness damper for seismic protection of single-degree-of-freedom structures

Experimental validation, analytical investigation, and design method of tuned mass damper‐clutching inerter for robust control of structures

Semi-active tuned mass dampers under combined variable actions of friction forces and external disturbances

Seismic response control of adjacent buildings coupled by semi-active shared TMD

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers