Abstract:This investigation delves into the residual stresses that arise during the deep drawing process of laser-welded blanks (LWBs) using a combination of experimental and numerical methods. While LWBs are preferred for their low distortion and high-quality welds, they are subjected to detrimental residual stresses during forming operations that can adversely affect their service life. The primary objective of this study is to evaluate the influence of five essential process parameters, namely welding power, welding speed, blank holder forces (BHF), friction coefficient, and material properties, on the residual stresses that are generated during the welding and forming of LWBs. Moreover, the study seeks to optimize these process parameters for the deep drawing process utilized in this investigation using response surface methodology (RSM). The hole-drilling method, a commonly used experimental technique for measuring residual stresses, was employed in this study to measure the residual stresses in different zones of laser-welded blanks (LWBs). The measurements were performed using a strain gauge rosette and were repeated three times to ensure accuracy. In addition, the Simufact package and Abaqus Unified FEA software are utilized to simulate the laser beam welding and forming processes, respectively. The close alignment between experimental and simulated outcomes suggests that the model is suitable for numerical simulation of the LWB deep drawing process (less than 10%). By conducting an analysis of variance, the main factors that influence the residual stresses in the welding and forming processes are identified. The findings suggest that welding power–welding speed (30.89%) and BHF (21.65%) have the most significant impact on residual stresses. Furthermore, selecting BHF = 50140.67N, friction coefficient = 0.2, welding speed = 7.4 mm/s, and welding power = 144.79W can enhance the confidence coefficient of the welding zone design.

Residual stresses in weld bead of low carbon steel plates welded by GMAW using LCR waves

Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles

Study of various parameters on residual stress relaxation for different welded components

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

A new experimental method to study the influence of welding residual stresses on fatigue crack propagation

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Ultrasonic Stress Evaluation on Welded Plates with Lcr Wave

Grain size correction of welding residual stress measurement in a carbon steel plate using the critical refraction of longitudinal waves

Experimental investigation and numerical simulation on welding residual stress of innovative double-side welded rib-to-deck joints of orthotropic steel decks

Welding residual stress analysis of the X80 pipeline: simulation and validation

EXPERIMENTAL STUDY OF WELDING RESIDUAL STRESS OF HIGH-STRENGTH SHIPBUILDING STEEL

Numerical Simulation of Welding for Residual Stress Prediction of Low Carbon Steel

Residual stresses with time-independent cyclic plasticity in finite element analysis of welded joints

Experimental investigation and numerical simulation of welding residual stress in orthotropic steel deck with diaphragm considering solid-state phase transformation

Surface Residual Stress Analysis in GMAW and LBW of the Dissimilar TRIP-DP Steels Joint: An Experimental Approach

Study on the Effect of Welding Residual Stress on Creep-Cyclic Plasticity Behaviour

Insight into the Key Process Parameters on Residual Stress Distribution in Deep Drawing of Laser-Welded Blanks: Response Surface Modeling

On the Mechanism of Residual Stresses Relaxation in Welded Joints under Cyclic Loading

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

Effect of Solid-State Phase Transformation and Transverse Restraint on Residual Stress Distribution in Laser–Arc Hybrid Welding Joint of Q345 Steel

Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing