Abstract:Considering the problems of high tillage resistance, high energy consumption, and failure to break the plow pan in subsoiling caused by the high viscosity of tea garden soil, a new design method of a subsoiler underlying the subsoiling mechanism based on structural bionics and the discrete element method is proposed. Taking the largest toe of mole cricket's forefoot as the bionic object, the biological information of the contour of mole cricket's toe was extracted using the methods of image processing and reverse engineering, and the edges of its outer and inner contours were obtained. Combined with the structure of an existing subsoiler, initial point cloud data of a bionic subsoiling shovel were mapped by the methods of proportional amplification and rotation. Taking the minimum sum of outer and inner contour fitting errors as the optimal objective function and selecting high-order polynomial as the fitting function, the optimization model of the outer and inner contour point cloud fitting function was established. The optimal fitting function of the outer and inner contour point cloud was obtained, and the bionic subsoiler model was established based on these two optimal functions. In the study of the discrete element, four soil particle models were proposed based on the actual shape of the cohesive soil of a tea garden. Based on the principle of discrete elements and the agronomic requirements, a modeling method of the plow pan soil was proposed. First, the adjacent soil particles at the bottom were connected by bonding, and the soil with large porosity was squeezed by the preset force to form the plow pan soil. Then, six tillage layers were added above the plow to form a soil structure model of the tea garden. The bionic subsoiler was assembled into a four-bar subsoiling mechanism. The process of the subsoiling mechanism acting on the soil was analyzed by the co-simulation of ADAMS-EDEM and compared with the common subsoiler. The results showed that the bionic subsoiler, compared with the common subsoiler, reduced the tillage force in the horizontal direction by 16.34% and in the vertical direction by 24.53%, reduced energy consumption by 9.64%, increased the damage to the plow pan by 5.10%, and caused greater disturbance to the internal soil. The influence of different driving speeds on the tillage performance was studied, which provides a theoretical reference for the better selection of the working speed for subsoiling.

Optimization design of bionic grousers for the crawled mineral collector based on the deep-sea sediment

Understanding front-rear track effect of seabed mining vehicle and traction performance optimization

Parameter optimization and tractive performance evaluation of tracked miner

Analysis of traction performance of deep-sea tracked mining vehicles under different grouser pitch-to-height ratios and traveling speeds

A block failure model for deep-sea sediment between grousers of deep-sea mining vehicles based on elasto-plastic theory

Design and comparative analysis of self-propelling drill bit applied to deep-sea stratum drilling robot

Traction rheological properties of simulative soil for deep-sea sediment

Track shoe structure optimization of deep-sea mining vehicle based on new rheological calculation formulae of sediment

Bionic optimization research of soil cultivating component design

Experimental Study on the Shear Characteristics of Deep‐Sea Sediments Based on a Mining Machine Walking Test Platform

Drag reduction and wear resistance mechanisms of a bionic shovel by discrete element method simulation

Research on the shear stress and microscopic deformation mechanism of deep sea sediments under the action of tracked miner

Semi-Empirical Time-Dependent Parameter of Shear Strength for Traction Force between Deep-Sea Sediment and Tracked Miner

Optimization design and performance study of a subsoiler underlying the tea garden subsoiling mechanism based on bionics and EDEM

Multiparameter Numerical Investigation of Two Types of Moving Interactions Between the Deep-Sea Mining Vehicle Track Plate and Seabed Soil: Digging and Rotating Motions

Simulation and optimization of the tracked chassis performance of electric shovel based on DEM-MBD

Study of wear test and wear-resistant mechanism of bionic non-smooth groove side in line pan

Compression–shear coupling rheological constitutive model of the deep-sea sediment

A Comprehensive Study on the Mechanical Properties of Bulldozing Plate Soil Engaging Surface Based on the Entropy-Weighted Grey Relational Analysis Method.

A Bionic Walking Wheel for Enhanced Trafficability in Paddy Fields with Muddy Soil

Numerical study on shear interaction between the track plate of deep-sea mining vehicle and the seafloor sediment based on CEL method