Abstract:The seafloor soil is characterized by high water content, strong compressibility, and low shear strength. Deep-sea mining vehicles (DSMV) are prone to sinking when walking on the surface of the soil, which will cause significant reduction in traction performance. Therefore, it is necessary to study the sinkage performance. The track is usually considered the travelling mechanism of the DSMV, and the track plate is an important part of the movement system. The study of the interaction between the track plate and the soil is of great significance to the study of the DSMV's sinkage performance. In this study, firstly, based on the in situ seafloor soil samples of 1000 m in a region of the South China Sea collected by a box sampler, the physical and mechanical parameters of soil were measured by indoor geotechnical instruments. Secondly, an elastoplastic soil numerical model similar to that of in situ soil was established. Based on coupled Eulerian-Lagrangian (CEL) method, a numerical model of the interaction between the track plate and soil was established. Considering the dynamic process, the structure of the track plate and the physical and mechanical properties of the soil, the numerical simulation were carried out under different conditions, such as different dynamic loading, the plate structural parameters and the soil physical and mechanical properties. It is found that the plate-sinkage curve were significantly influenced by these factors. The findings are as follows, firstly, with the increase in the pressure loading rate, the soil sinkage decreasing at the same pressure. On the other hand, with the increase in velocity, soil flow was accelerated, and the nonlinear relationship between resistance and velocity became more obvious; the L/B ratio of different track plates affects the variation law of the curve, and the maximum sinkage gradually decreases as the ratio of L/B increases; with the increase in the grouser height, the maximum sinkage gradually decreases, and the pressure-sinkage curve changes obviously with the grouser type; and different soil physical and mechanical properties affect the variation of pressure-sinkage curve. Innovatively, the heterogeneous soil stress distribution mode was obtained through the fitting function and Python secondary development. This study can provide a reference for studying the sinkage performance of the DSMV.

Experimental Study on the Shear Characteristics of Deep‐Sea Sediments Based on a Mining Machine Walking Test Platform

Research on the shear stress and microscopic deformation mechanism of deep sea sediments under the action of tracked miner

Experimental Platform Development of Similar Simulation and Mechanical Test for Undersea Metal Mining

Numerical study on shear interaction between the track plate of deep-sea mining vehicle and the seafloor sediment based on CEL method

Compression–shear coupling rheological constitutive model of the deep-sea sediment

Parameter optimization and tractive performance evaluation of tracked miner

Understanding front-rear track effect of seabed mining vehicle and traction performance optimization

Semi-Empirical Time-Dependent Parameter of Shear Strength for Traction Force between Deep-Sea Sediment and Tracked Miner

Dynamic Response Analyses and Experimental Research into Deep-Sea Mining Systems Based on Flexible Risers

Numerical Study on Multiple Parameters of Sinkage Simulation between the Track Plate of the Deep-Sea Mining Vehicle and the Seafloor Soil

Traction rheological properties of simulative soil for deep-sea sediment

Multiparameter Numerical Investigation of Two Types of Moving Interactions Between the Deep-Sea Mining Vehicle Track Plate and Seabed Soil: Digging and Rotating Motions

Predicting the sinkage of a moving tracked mining vehicle using a new rheological formulation for soft deep-sea sediment

A block failure model for deep-sea sediment between grousers of deep-sea mining vehicles based on elasto-plastic theory

Design and Application of a Deep-Sea Engineering Geology In Situ Test System

Investigation of tracked mining vehicles' driving performance at varying travel speeds by experimental and numerical simulation

Analysis of the thermo-hydro-mechanical coupled dynamic response of sediments under eccentric driving of deep-sea mining vehicle

Assessment of Seabed Trench Formation Based on Marine Sediment Properties and Chain-Bar Penetration Tests

Multi-Body Dynamics Modeling and Straight-Line Travel Simulation of a Four-Tracked Deep-Sea Mining Vehicle on Flat Ground

Development of Hydraulic Lifting System of Deep-Sea Mineral Resources

Centrifuge experiment on the penetration test for evaluating undrained strength of deep-sea surface soils