Production of biocoal from wastewater sludge and sugarcane bagasse using hydrothermal carbonization

Zinhle Mkhwanazi,Yusuf. M. Isa

DOI: https://doi.org/10.1002/bbb.2447

2022-10-08

Biofuels, Bioproducts and Biorefining

Abstract:The growing demand for fuel in South Africa due to the depletion of reserves demonstrates the need for alternative energy sources, a renewable resource such as biomass can be optimized as an energy source. Wastewater sludge and bagasse have the energy potential to produce high calorific value biocoal, this will contribute to the supply of energy in South Africa. The synthesis of biocoal from wastewater sludge and bagasse through an artificial synthetic coal production process, i.e., hydrothermal carbonization (HTC) is preferred over other thermal conversion techniques as HTC is capable of handling feed having a high (75‐90%) moisture content. In this study, wastewater sludge and sugarcane bagasse were subjected to hydrothermal carbonization, where the effect of temperature was explored at 180°C, 210°C, 240°C, and 260°C. A ratio variation of 100:0, 80:20, 60:40, 40:60, 20:80 and 0:100 dry sludge to bagasse (S: B), and the composition of solid to liquid (solid loading wt. %) of 1:10, 2:10, 3:10, and 4:10 (SB:H2O) corresponding to 9.09 wt.%, 16.67 wt.%, 23.08 wt.% and 28.57wt.% loading were investigated. The results obtained in this study revealed that solid loading, temperature, biomass type, and ratio variation had a substantial impact on the yield and calorific value of biocoal produced. The highest biocoal yield of 23.36 wt. % was achieved at 210°C and derived from sludge/bagasse (S/B) with a sludge content of 20%. Across all runs, the highest calorific value of 20.21MJ/kg was achieved at 260°C when pure bagasse was employed (0% sludge content). This article is protected by copyright. All rights reserved.