Abstract:This study investigates the viability of employing biochar made from agricultural waste, such as mushroom cultivation waste (MR), specifically looking at its production under high carbonization temperatures and its ability to effectively reduce iron oxides. Through the optimization of the carbonization process, we were able to develop biochar that has a higher carbon content and reactivity to use as a reducing agent for the reduction process. The experimentation occurred in a batch multi-sectional temperature-controlled reactor spanning temperatures from 300 to 900 °C. In order to comprehensively assess the properties of biochar, we utilized a range of analytical instruments, such as the elemental analyzer (EA), Brunauer–Emmett–Teller (BET), thermogravimetric analyzer (TGA), X-ray fluorescence (XRF), and scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) analysis. As a result, with a carbonization temperature of 900 °C and a maximum fixed carbon content of 52.49 wt%, this biochar exhibits exceptional efficacy. In addition, the iron has a lowered sulfur level, which enhances its quality by reducing hardness and cracking. Moreover, at the initial stage, the feedstock has a specific surface area (SSA) of 0.874 m 2 /g and a total pore volume (TPV) of 0.004 cm 3 /g. Upon the application of heat, these values progressively rise, demonstrating significant increments, starting at 400 °C (SSA: 3.384 m 2 /g, TPV: 0.011 cm 3 /g) and even more drastically at 900 °C (SSA: 17.994 m 2 /g, TPV: 0.027 cm 3 /g). This study suggests the utilization of MR biochar, which is synthesized at a temperature of 700 °C, with a coke-to-biochar ratio of 20:80. It has been specifically identified as a suitable reducing agent for ironmaking processes at a temperature of 1300 °C for 20 min. This suitability is likely attributed to cost-effectiveness, energy efficiency, practical considerations, and a high metallization percentage. As a result, biochar is a practical and environmentally sustainable substance that can improve the sustainability and efficiency of the ironmaking process, therefore promoting the adoption of more environmentally friendly industrial practices.

Blending Saccharum bagasse and waste cooking oil for biofuel production via microwave co-torrefaction process

Biowaste-to-biochar through microwave-assisted wet co-torrefaction of blending mango seed and passion shell with optoelectronic sludge

Microwave-assisted wet co-torrefaction of food sludge and lignocellulose biowaste for biochar production and nutrient recovery

Co-processing textile sludge and lignocellulose biowaste for biofuel production through microwave-assisted wet torrefaction

Repurposing Washingtonia filifera petiole and Sterculia foetida follicle waste biomass for renewable energy through torrefaction

Progress in the torrefaction technology for upgrading oil palm wastes to energy-dense biochar: A review

Catalytic microwave-assisted torrefaction of sugarcane bagasse with calcium oxide optimized via Taguchi approach: Product characterization and energy analysis

Impact of Biochar Addition in Microwave Torrefaction of Camelina Straw and Switchgrass for Biofuel Production

Torrefaction of fruit waste seed and shells for biofuel production with reduced CO2 emission

Conversion of biomass blends (walnut shell and pearl millet) for the production of solid biofuel via torrefaction under different conditions

Evaluating the blending potential of two different biomass via co-pyrolysis as sustainable pathway using RSM optimization for bioenergy and bio char production

Eco-friendly, Stable, and High-Performance Biochar Prepared by a Twice-Modification Scheme: Saccharification of Raw Materials & Thermal Air Oxidation of Biochar

Thermal Properties of Biochars Derived from Waste Biomass Generated by Agricultural and Forestry Sectors

Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology

Simultaneous implementation of sludge dewatering and solid biofuel production by microwave torrefaction

Pore volume upgrade of biochar from spent coffee grounds by sodium bicarbonate during torrefaction

Integrated water washing and carbonization pretreatment of typical herbaceous and woody biomass: Fuel properties, combustion behaviors, and techno-economic assessments

Upcycling crab shell waste into biochar for treatment of palm oil mill effluent via microwave pyrolysis and activation

Sludge dewatering through H2O2 lysis and ultrasonication and recycle for energy by torrefaction to achieve zero waste: An environmental and economical friendly technology

Hydrothermal co-hydrolysis of corncob/sugarcane bagasse/Broussonetia papyrifera blends: Kinetics, thermodynamics and fermentation

The development of biochar obtained from agricultural waste as a reducing agent in the ironmaking process