Abstract:Ultra-high-performance fiber-reinforced cement-based composite (UHPFRC) has been increasingly adopted for rehabilitation projects over the past two decades, proving itself as a reliable, cost-efficient and sustainable alternative against conventional methods. High compressive strength, low permeability and high ductility are some of the characteristics that render UHPFRC an excellent material for repairing existing aged infrastructure. UHPFRC is most commonly applied as a surface layer for strengthening and rehabilitating concrete structures such as bridge decks or building slabs. However, its implementation with steel structures has so far been limited. In this work, the UHPFRC strengthening of a steel bridge is investigated both in simulation as well as in the laboratory, by exploiting a real-world case study: the Buna Bridge. This Croatian riveted steel bridge, constructed in 1893, repaired in 1953, and decommissioned since 2010, was removed from its original location and transported to laboratory facilities for testing prior to and after rehabilitation via addition of UHPFRC slab. The testing campaign includes static and dynamic experiments featuring state-of-the-art monitoring systems such as embedded fiber optics, acoustic emission sensors and digital image correlation. The information obtained prior to rehabilitation serves for characterization of the actual condition of the structure and allows the design of the rehabilitation solution. The UHPFRC slab thickness was optimized to deliver optimal fatigue and ultimate capacity improvement at reasonable cost. Once the design was implemented, a second round of experiments was conducted in order to confirm the validity of the solution, with particular attention allocated to the interface between the steel substrate and the UHPFRC overlay, as the connection between both materials may result in a weak contact point. A detailed fatigue analysis, based on updated FEM models prior to and after strengthening, combined with the results of a reliability analysis prove the benefits of adoption of such a solution via the significant extension of the structural lifespan.

Repair of reinforced concrete bridge columns subjected to chloride‐induced corrosion with ultra‐high performance fiber reinforced concrete

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Seismic Retrofit and Repair of Circular Bridge Columns with Advanced Composite Materials

Getting More Out of Existing Structures: Steel Bridge Strengthening via UHPFRC

Rehabilitation and Strengthening of Concrete Structures Using Ultra-High Performance Fibre Reinforced Concrete

Repair of corroded steel bridge girder end regions using steel, concrete, UHPC and GFRP repair systems

Exploitation of Ultrahigh-Performance Fibre-Reinforced Concrete for the Strengthening of Concrete Structural Members

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Strategies for strengthening of corroded reinforced concrete beams using CFRP laminates and UHPC jacketing

Axial Compressive Behaviour of Simulated Corrosion-Damaged RC Columns Retrofitted with UHPFRC Jackets Subjected to Dry-Wet Cycling Condition

Experimental Study on Flexural Capacity of RC Beams with Cross-Section Patching Repair and Strengthening by CFRP Sheet

Experimental Study on Seismic Performance of Precast Columns Repaired with CFRP Fabrics

Experimental and analytical study on flexural behavior of corroded RC beams strengthened with CFRP rods and UHPC

Repair of Damaged Continuity Joints Using Ultra-High Performance, Fiber Reinforced Self-Consolidating, and Magnesium–Aluminum–Liquid–Phosphate Concretes

Shear Strengthening of Corroded RC Beams Using UHPC–FRP Composites

Chloride ion permeability of Ultra-high-performance fiber-reinforced concrete under sustained load

Repairable Precast Concrete Bridge Columns for Seismic Events

Finite Element Modelling of Corrosion-Damaged RC Beams Strengthened Using the UHPC Layers

Economic assessment of corrosion prevention measures in new structures

Extent of corrosion damage for RC structures exposed to chloride-bearing environment